• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Sportsman vs. Stock

  • Thread starter Thread starter TrueBlue95GT
  • Start date Start date May 18, 2005

TrueBlue95GT

Member
Sep 29, 2003
966
0
16
Connecticut
May 18, 2005
#1
  • May 18, 2005
  • #1
How much more power can the Sportsman block handle compared to the stock or even the mexican blocks?
 
I

igotyofire

Member
Feb 26, 2004
774
1
19
Southern California
May 18, 2005
#2
  • May 18, 2005
  • #2
they say the stock block is good for 400-500whp, The mexican block has more material on the mains and thicker on various areas of the block i belive than the sportsman, people say sportsman is only about maybe can potentially hold 100 more whp safely then a stock block and that the mexican block is stronger. But i think i remember reading of cases where people have still cracked the sportsmen block right down the lifter valley. I know on the turbomustangs forum they have a great discussion on this with pics of the blocks and everything
 

OinkAodeOink

Founding Member
Jun 5, 2002
3,026
1
0
Daytona bch, Florida
May 18, 2005
#3
  • May 18, 2005
  • #3
I have seen the pictures of the Mexican, which they claim is a good block, and honestly, it looks identicle to the sportsman.. You can defintally tell a diference in the Sportsman and Mexican when compared to a stock 94 GT block.
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
May 18, 2005
#4
  • May 18, 2005
  • #4
I know of a couple that have cracked. IMO the sportman is a waist of time and money for the simple reason it doesn't offer enough extra over a stock block to justify the cost of it. If you serious enough to need a better block than a stock one then I would save my pennys a little longer and go straight for a Dart or R302 IMO. There is a reason Ford Motorsports keeps decreasing the power rating on these B blocks. they now say there good for 450 Hp.. I think it use to be 600 http://www.fordracingparts.com/parts/part_details.asp?PartKeyField=5031
I like the last line: Although I think there worth more than 450
Extensive dynamometer and in vehicle testing has confirmed that this block should not be used for engines exceeding 450 HP @ 6000 RPM
 

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
May 18, 2005
#5
  • May 18, 2005
  • #5
where can you get one of these "mexican blocks", how much do they run?
 
S

SuperDust22

The Power of Pixie Dust?!
Oct 19, 2003
1,821
0
0
Gilbert,AZ
May 18, 2005
#6
  • May 18, 2005
  • #6
Subscribing

Dustin
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
May 18, 2005
#7
  • May 18, 2005
  • #7
1994Vib.RedGT said:
where can you get one of these "mexican blocks", how much do they run?
Click to expand...

I heard a rumor a couple years ago that D&D motorsports went down and bought a bunch.. Not sure how true it is though and if they would still have any? But again IMO I would use your stock block with a girdle and ARP studs before I spent any amount of money on one of these.
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
May 18, 2005
#8
  • May 18, 2005
  • #8
the sportsman have four bolt mains on the center 3 caps. while the outer 2 are still 2 bolt mains.

the mexican block as stated above have thicker main caps. side by side to a regular 2bolt main. the mexican has some beefy main caps. and also thicker walls in certian areas.

but if you could ever see a complete dart or R302 short block. you ill want to mount the engine stall. cause all of my pennys are going to a R block my friends
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
May 19, 2005
#9
  • May 19, 2005
  • #9
donkey_punch said:
the sportsman have four bolt mains on the center 3 caps. while the outer 2 are still 2 bolt mains.
Click to expand...

No it doesn't. The motorsports B50 sportsman is 2 bolt mains all 5 caps. I think your confusing B50 sportman with the Dart sportsman which is 4 bolt on the inner 3 like the R block.. But the sportsman block from Ford is 2 bolt like state in the link I posted above and as you can see in the picture on the link.
 

4Jenna

Founding Member
Sep 12, 2001
4,326
6
69
AZ
May 19, 2005
#10
  • May 19, 2005
  • #10
If your buying a block for power....buy a Dart/R/World Products.....period.


Or read my sig
 

1994Vib.RedGT

Member
Aug 19, 2004
585
0
16
Denver, CO
May 19, 2005
#11
  • May 19, 2005
  • #11
what about a daily driver 331 stroker, KEEPING a/c and p/s
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
809
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
737
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
S
Is the BOSS 302 block oem compatible with the 95 302?
  • saf_blu302
  • Aug 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
440
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 2, 2025
revhead347
SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
Fox Good shop in Washington state or Oregon
  • keel
  • May 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
116
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 20, 2026
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?