Spray Painting advice?

Nik_95Cobra

Founding Member

Feb 5, 2002

1,677

1

37

Tempe, Arizona

Oct 26, 2005

#1

• Oct 26, 2005

• #1

Hey ya'll, I need to repaint a front spoiler for one of my other cars (Daily Driver), and I can't decide if I just want to try to do it myself with spray paint or if I want to pony up like $200 to have it repainted (instead of waiting til I get the entire car repainted which this can get me by) How many of you spray painted something and had it come out looking good? The Spoiler is made of flexible ABS plastic, I was considering just using Krylon Fusion, color's a close match...But I don't want it to peel and crack in 2 months. Allrighty let me know thanks...

 

super302

I'd do anything for free Bapples

May 29, 2004

2,878

1

0

Davenport, IA

Oct 26, 2005

#2

• Oct 26, 2005

• #2

Spray painting is very easy if you know how to do it, heres my method:

Lay the item long ways:
[]
[]
[]
[]
[]

then spray from one end to the other starting 3inches to the left, then going to 3inches past the right.
after you hit the right, let go of the 'button' and start over, just wherever your spray didnt touch, try not to overlap toooo much......make any sense???

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Oct 27, 2005

#3

• Oct 27, 2005

• #3

super302 said:

Spray painting is very easy if you know how to do it, heres my method:

Lay the item long ways:
[]
[]
[]
[]
[]

then spray from one end to the other starting 3inches to the left, then going to 3inches past the right.
after you hit the right, let go of the 'button' and start over, just wherever your spray didnt touch, try not to overlap toooo much......make any sense???

Click to expand...

 

95opal

5 Year Member

Nov 16, 2004

449

20

39

Oct 27, 2005

#4

• Oct 27, 2005

• #4

automotive paint stores will mix factory colors in a spray can for ya and they will also mix clear in spray can to.pull the paint code and have them mix it for ya dont use crayola crap.

 

FORCED2DV8

New Member

Jun 6, 2005

458

0

0

Grand Rapids MI

Oct 27, 2005

#5

• Oct 27, 2005

• #5

If your just looking for some color on it then, make sure its really clean and paint it, want it glossy, spray some clear on it, and lightly buff out.

 

ROLLIN5.0

New Member

Nov 19, 2004

135

0

0

Tulsa, OK

Oct 28, 2005

#6

• Oct 28, 2005

• #6

I spray paint EVERYTHING. I haven't had anything turn out bad yet. The key with plastic is the prep (clean with alcohol, or equivalent), prime (atleast two coats), and don't let it get too wet (paint). You can always get a spot on the next coat. If you get a run or some bubbles, let the paint set up for a couple days so it has a chance to get hard. Try to buff out, or lightly sand the areas, and then soak it with clear.
Brandon

 

F

flaming70vw

New Member

Dec 13, 2004

44

0

0

Oct 28, 2005

#7

• Oct 28, 2005

• #7

I read somewhere to let the cans soak in hot water before you start. It helps even out the paint better. (something about the paint atomizing in the can or something). And use one of those can holders that you only have to squeeze. Your thumb won't get sore and it helps get a even coat on.