springs

[myboyhasa66]

quick but stupid question. i have a chance of buying an eibach prokit but its for a 5.0. will it affect anyting if i put them in my turboford

 

[evintho]

It won't sit as low due to the obvious weight difference of the motors. I would assume ride and handling would be affected, also. Here's the correct part #'s for our cars........................

http://www.turboford.net/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=10;t=000068

 

[KenneBell]

I put on the 5.0 springs and it lowered the car in the rear, since the K member is different on the 4 banger the aftermarket springs are actually taller than the 5.0 lowering springs so I wound up with a ghetto cruiser, with the front 2 inches higher and the back 2 inches lower, looked hillarious. So get some 4 banger lowering springs, lol!

 

[SVOconvLX85]

I thought the k members were the same on 4 cylinders and 5.0's???