• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Squeak from Pside C pillar. WTF mate?

  • Thread starter Thread starter '03GTinFLA
  • Start date Start date Jun 12, 2006
0

'03GTinFLA

Member
May 29, 2004
486
0
17
St. Petersburg, FL
Jun 12, 2006
#1
  • Jun 12, 2006
  • #1
Gonna rip some stuff apart tomorrow cause I can't take it anymore. I've sat in the back seat and in the trunk and I swear it sounds like it's coming from somewhere between the speaker and/or the C pillar plastic cover. I took out trunk interior, messed with the shocks, LCA's and exhaust, nothing. It doesn't happen when the car is sitting still and you bounce it from the bumper. It's only when driving and it's from tiny bumps or parking lot surface irregularities. Not really on the teeth rattlin big bumps and it's getting worse.
Any suggestions on where to look or how to get the plastic covers off of the C pillar. I'm gonna take the beack seat apart and go from there untill I get it.
 

LI98GTStang

Founding Member
Jun 22, 2000
1,715
0
36
L.I., NY
Jun 12, 2006
#2
  • Jun 12, 2006
  • #2
Here, give this thread a read and see if it's one of the suggestions. Typically has been either the e-brake or the speaker mount weld that is found to be the source.

http://forums.stangnet.com/showthread.php?t=464648&highlight=squeak
 
0

'03GTinFLA

Member
May 29, 2004
486
0
17
St. Petersburg, FL
Jun 13, 2006
#3
  • Jun 13, 2006
  • #3
YES. I'm so happy.
Thanks for the link. Yeah :SNSign:
I got in the trunk, pulled the liner out, folded down back seats, gave a little pressure/shake to the back seat brakets and found the spot weld that was weak, then jammed a screw driver in there and bent it out a little. NO MORE SQUEEKS.
THANK YOU! THANK YOU! THANK YOU!

If you've got some creaks coming from your rear (of the car ) then look at the crapo spot welds.
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mkk50's Progress Thread
  • mkk50
  • Aug 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
695
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 22, 2025
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
My 93 4v Fox
  • OffspringChaos
  • Aug 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2024
bird_dog0347
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
6K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
Engine Ron Francis aka The Detail Zone and their Ford harnesses are beyond poor quality.Here's why.
  • CAMTWO1070
  • Oct 20, 2022
  • Fox 5.0 Mustang Tech
Replies
14
Views
5K
Fox 5.0 Mustang Tech Nov 13, 2022
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?