North East SSoM Members!!!

BadVoodoo · Jul 16, 2006

Nice seeing you today Larry! Nice runs too. Lemme know if you can go down to Epping next weekend. Later

DoubleONegative · Jul 16, 2006

Badstang00 said:
Nice seeing you today Larry! Nice runs too. Lemme know if you can go down to Epping next weekend. Later

so what are the results ****ers!!!

Hey shaw did ya see my burnout vid on the last page??

gaslight · Jul 16, 2006

Badstang00 said:
Plus it will look cool

I figured that was the big selling point.

gaslight · Jul 16, 2006

I had to save up my pennies. Finally ordered a helmet from Summit. SHould be here this week so I should be good to go for the test and tune next weekend.

BadVoodoo · Jul 16, 2006

DoubleONegative said:
so what are the results ****ers!!!

Hey shaw did ya see my burnout vid on the last page??

Sorry Mike, but only 1/8th mile times for now. Next week is Epping assuming all goes well.

R/T-.595
60'-1.812
330- 4.992
1/8-7.567
MPH-96.77

Keep in mind that the IAT today was about 95*, and that the IAT2 reading was between 130* and 140*. I datalogged one of my runs, and the IAT2 read 160* after the run!! Needless to say, the car was pulling timing from me big time. No way was I a 600rwhp car today. I did the best I could to keep the intake temps down by putting ice on the intercooler reservoir, and jumping the intercooler pump. I think with cooler intake temps so I can make full power, and a better 60', high 6's are possible at around 100mph in the 1/8th.

To help beat the heat, I ordered these little goodies today

LFP Supertank Intercooler Reservoir SVT Cobra Polished

LFP Performance Race Radiator

Evans 2001-2004 4.6L Mustang and Supercharged Mustang Cobra coolant pump

ACCELERATOR -UNLEADED - 5 Gallon pail

BadVoodoo · Jul 16, 2006

gaslight said:
I had to save up my pennies. Finally ordered a helmet from Summit. SHould be here this week so I should be good to go for the test and tune next weekend.

Great!!! About time you got a helmet besides the shiny one in your mouth

Venom351R · Jul 16, 2006

Just got home from Jersy about 15 mins ago. Well now there is only 1 SSOM Member that is Stangless

What a long ass drive that was but the car ran great the whole way, no real problems at all even when we got stuck in traffic on the george washington bridge, it heated up some but stayed in the normal range.

Its got a few bugs and tweeks that needs to be taken care of before it can be driven on the road on a regular basis. Has a starting problem that needs to be taken care of, not sure if its the solinoid or what, its not the starter thats brand new. The guy I got it from said the saftey netural switch was bad and that was the prob

Anyway feels good to have a Mustang again, its my 4th one and my 1st fox but I have a feeling this is going to be the most fun car out of them all.

Oh yeah, and the header gaskets are leaking , some things never change

BadVoodoo · Jul 16, 2006

Redline_RR said:
Just got home from Jersy about 15 mins ago. Well now there is only 1 SSOM Member that is Stangless

What a long ass drive that was but the car ran great the whole way, no real problems at all even when we got stuck in traffic on the george washington bridge, it heated up some but stayed in the normal range.

Its got a few bugs and tweeks that needs to be taken care of before it can be driven on the road on a regular basis. Has a starting problem that needs to be taken care of, not sure if its the solinoid or what, its not the starter thats brand new. The guy I got it from said the saftey netural switch was bad and that was the prob

Anyway feels good to have a Mustang again, its my 4th one and my 1st fox but I have a feeling this is going to be the most fun car out of them all.

Oh yeah, and the header gaskets are leaking , some things never change

Welcome back!!! It's great to have another pony back in the stable Are you working next weekend?

FEARNO1 · Jul 16, 2006

Welcome back Travis....Congrats on the car. Stay away from that stuff called WD-40...LOL

Venom351R · Jul 16, 2006

Badstang00 said:
Welcome back!!! It's great to have another pony back in the stable Are you working next weekend?

yeah I do have to next weekend, I have the one after that off. Im off this weds/thurs and work the weekend.

Fred- I'll keep that in mind

View attachment 455275

View attachment 455277

I'll post some pics of my own but as of now the digi cam battery's are dead....

DoubleONegative · Jul 16, 2006

Nice looking fox trav!!!

Love that color blue
So umm whens the TT 347 stroker going in

Venom351R · Jul 17, 2006

DoubleONegative said:
Nice looking fox trav!!!

Love that color blue
So umm whens the TT 347 stroker going in

no TT, just a 347. Ported Heads,Intake..good matching cam... hopefully next spring

DoubleONegative · Jul 17, 2006

Shaw with tha 1/8 mile time and trap i would expect you may not get many runs at NED before you get kicked

But that would be cool as hell!!!!

Buttnuttn8 · Jul 17, 2006

hey Maine boys

hey sorry to intrude on your guys topic but im very interested in where you guy get your stangs dyno tuned. Im also in maine but am having a hard time finding dyno shops in the area so any further information would be great

thanks ahead of time

DoubleONegative · Jul 17, 2006

Pete at performance dyno
or
Dana at Pro Tree performance and Dyno, both are in New Hampshire

http://www.performance-dyno.com/index.html

http://www.protreeperformance.com/

Dan_Soprano · Jul 17, 2006

sweet Trav! Welcome back!! I'll see about getting our CT changed to something more appropriate!

Venom351R · Jul 18, 2006

Dan_Soprano said:
sweet Trav! Welcome back!! I'll see about getting our CT changed to something more appropriate!

haha thanks, that would make more sense. I guess an avatar change would help as well on my part.

Venom351R · Jul 18, 2006

Buttnuttn8 said:
hey sorry to intrude on your guys topic but im very interested in where you guy get your stangs dyno tuned. Im also in maine but am having a hard time finding dyno shops in the area so any further information would be great

thanks ahead of time

There is a dyno in Portland at Performace Dyno, its right off ( former exit 8 ) at NEAD ( New England Auto Design ) try getting in touch w/ them if you want to go to one closer then N.H.

Where in ME are you?

FEARNO1 · Jul 18, 2006

Dan_Soprano said:
sweet Trav! Welcome back!! I'll see about getting our CT changed to something more appropriate!

I like the new one....

FEARNO1 · Jul 18, 2006

Redline_RR said:
There is a dyno in Portland at Performace Dyno, its right off ( former exit 8 ) at NEAD ( New England Auto Design ) try getting in touch w/ them if you want to go to one closer then N.H.

I thought that one was called F1 Dyno??

North East SSoM Members!!!

BadVoodoo

DoubleONegative

Active Member

gaslight

gaslight

BadVoodoo

BadVoodoo

Venom351R

BadVoodoo

FEARNO1

Venom351R

DoubleONegative

Active Member

Venom351R

DoubleONegative

Active Member

Buttnuttn8

New Member

DoubleONegative

Active Member

Dan_Soprano

Venom351R

Venom351R

FEARNO1

FEARNO1

Similar threads

North East SSoM Members!!!

Active Member

Active Member

Active Member

New Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency