yeah always seems like there is not enough time for a lot of things to get done. No sknnies yet I still have to buy a set of wheel spacers for the front so they will clear the brakes and some longer wheel studs. I still want to run them but they got pushed back until the rest of the car is done first b/c right now its down in N.H b/c Andy (rio5.0) offered to put the 4.10s in which are in now and to do the fox TB swap on it b/c he had all the hardware and sensors that he bought off someone else so all I had to get was the TB and EGR delete plate. Im picking it back up from him next weekend, riding down with mike again and when we get back to his place we are going to put the rear shocks and springs in. Im planing on that following week to take it down to concord to have pete retune it b/c I think its really really rich right now b/c I decided to run the proper 94/95 ECU in it that I had and take the custom one out and doing so I think is making it run really rich b/c thats not the ECU the chip was tuned with b/c I used half a tank taking it down to Andy's last weekend and it was only 60 miles. After its tuned again I have to take it back to chris to have the K member, coil overs and CC plates put in.
Im hoping to hit the track the second week of May skinnies or not. Either way I do plan on getting them....and yeah always seems like there is to much to do and not enough time.
Should pull like a raped ape on speed balls
how did it run?
Any tracks near you at all?
bring it, didnt get slicks and 31 spline axles for nothing.
Whats your best 60' so far anyway?
so I pretty much pwned you with my 1.710I'll have 1.6's this year.
BTW.... 4.10s are AWESOME!!!!!!!!
true but the 4v powa will own you on the big end!
oh i bet that 351 is nasty with the 4.10s!!!!!!!!!!!!!!!!!!!!
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?