North East SSoM Members!!!

#5,603
Striped5.0 said:
I hope to see 370-390 RWHP w/ the power pipe on there and some magnaflows along w/ a better Mass air Meter. Of corse Im going to have to buy ANOTHER $300 clutch before I go back to the dyno. :nonono:
Click to expand...
WTF, you are so out of touch with reality.. You'll never see those numbers with the combo you have right now. Your engine has a ton of miles on it and its all stock. I'am not going to admit to anything, until we know for sure what the problem is. Oh, thats right you went to school for automotve repair and was ASE master certified and have you state inspection licence :rolleyes: .
Once again your an expert on a subject that you know nothing about. Believe me I can take anything you can dish out. Your pretty amazing, how you can bring out the bad side of everyoone. Congrats... :nice:
 
#5,604
whitehorseupnorth said:
WTF, you are so out of touch with reality.. You'll never see those numbers with the combo you have right now. Your engine has a ton of miles on it and its all stock. I'am not going to admit to anything, until we know for sure what the problem is. Oh, thats right you went to school for automotve repair and was ASE master certified and have you state inspection licence :rolleyes: .
Once again your an expert on a subject that you know nothing about. Believe me I can take anything you can dish out. Your pretty amazing, how you can bring out the bad side of everyoone. Congrats... :nice:
Click to expand...
:owned: AGAIN!!!
 
#5,612
DoubleONegative said:
Back....

Finally....Fred when would be a good day for me to come up and take that crap i left up there off your hands??? and how's Michael BTW Dan tells me he is all over the place now.

I don't know i f a said this before but i now have a 9psi and a 11psi pulley for Slobra.

between leave and school i missed out on alot of drama it appears.

Mike
Click to expand...

Nice to see that you crawled out of the darkness you nocturnal cum guzzler!!

-Mike
 
#5,615
DoubleONegative....Fred when would be a good day for me to come up and take that crap i left up there off your hands??? and how's Michael BTW Dan tells me he is all over the place now.. Mike[/QUOTE said:
Welcome Back...I dont know when a good time is we'll figure something out
Click to expand...
 
#5,617
Dan_Soprano said:
PAY UP SUCKA!!!!!!
Click to expand...


Never said I wasnt, but Im not paying for a clutch install until I find out why it is slipping, if its a defect clutch then fine I'll eat the cost of a new one and the cost of the intall but if it is slipping b/c of the WD-40 then Im not paying for the install on a ruined $300 clutch.
 
#5,618
whitehorseupnorth said:
WTF, you are so out of touch with reality.. You'll never see those numbers with the combo you have right now. Your engine has a ton of miles on it and its all stock. I'am not going to admit to anything, until we know for sure what the problem is. Oh, thats right you went to school for automotve repair and was ASE master certified and have you state inspection licence :rolleyes: .
Once again your an expert on a subject that you know nothing about. Believe me I can take anything you can dish out. Your pretty amazing, how you can bring out the bad side of everyoone. Congrats... :nice:
Click to expand...


I never said I was an expert on anything, but it dosent take an ASE Master Certified Mech to know that WD-40 on a kevlar clutch is not a good thing. When I talked to SPEC and explained to them how the clutch was acting they said it sounded more like a contamination prob more then anything.

There are guys in the 94/95 section pulling 392 RWHP 380 TQ on stock heads and cam on 160,000 miles on there motors w/ 10-12 PSI on Vortech S-Trims that are simmilar to the Novi 2000

I dont bring out the bad side in anyone, your the only one that seems to have a prob recently.
 
You must log in or register to reply here.

Similar threads

M
Too much for me to repair in my current housing situation
Replies
8
Views
337
The Welcome Wagon
Noobz347
Noobz347
J
Exhaust manifold to Y-pipe nut & stud dimensions?
Replies
2
Views
108
SN95 V6 Mustang Tech
joeybuddy96
J
Zero_chance
WTB 89 Hatchback interior trim - any color
Replies
2
Views
109
Want to Buy
Noobz347
Noobz347
P
rear Impact absorbers.
Replies
2
Views
171
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Praetorious
P
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
Replies
3
Views
387
Other Auto Tech
Noobz347
Noobz347
Top Bottom
Back
Forums
Menu