North East SSoM Members!!!

[gaslight]

I plan on getting my tune tweaked that day also..........

Don't use the outhouse with Mike or you might get something else tweaked.

 

[gaslight]

you get the big brown truck airborn?

No. I don't want to pick up the mess afterwards.

 

[gaslight]

you know what I mean dick!!

Just making Mike nervous. Its good for a laugh.

 

[Dan_Soprano]

No. I don't want to pick up the mess afterwards.

i'd be cool though!

 

[Dan_Soprano]

Just making Mike nervous. Its good for a laugh.

word

 

[whitehorseupnorth]

Looks like an oil pan gasket or some where higher up. Check the bolts like Dan said seee what happens.

I thought you have the adjuster installed. I'am not sure what your refering to.

 

[whitehorseupnorth]

Bilsteins are not cheap but are supposed to be great shocks and last a long time. You could always go el cheapo with Monroe. Some like the Monroe shocks especially for the price.
Go COIL OVER! Thats what I want.

I got some 10 way Strange Engineering shocks and struts comming. The price wasn't that bad from summit. I took the rears off today and when I compressed them, they wouldn't come back out. No wonder it rode like crap. They were junk and the fronts might have been ok, but they needed changing anyway. I did a search on most of the boards and eveyone loves them. Most guys liked them more than the tokicos or konis. I figured I would give them a try. Can't wait to see how she brakes and rides this summer...

 

[BadVoodoo]

Remove digit from anus and insert in your mouth.

I tried the link but couldn't connect.

Try it now

http://www.cardomain.com/ride/555707/2

 

[BadVoodoo]

Looks like an oil pan gasket or some where higher up. Check the bolts like Dan said seee what happens.

I thought you have the adjuster installed. I'am not sure what your refering to.

Yes Chris, it is installed. I am just a little fuzzy on the last set of instructions. Should I be able to move the clutch fork easily?


You want to check that the clutch fork has a little slack in it which will keep the throwout bearing from engaging the pressure plate, wearing it out. It should just barely come off the pressure plate fingers when you wiggle the clutch fork.

 

[BadVoodoo]

Looks like either the pan is leaking, or the oil press. sending unit is leaking. no biggy either way. Just tighten the bolts on the pan up and see what happens.

Gotcha. I will get on it today.

 

[BadVoodoo]

i talked to pete and he said he will be tuning that day. It may be before or after the main group goes. I plan on getting my tune tweaked that day also..........

Hell, I would not mind getting tuned on that day. I'll ask him about it.

 

[BadVoodoo]

Any thoughts on this guys? Should I clean it up before I put my wheels back on?

 

[cold96snake]

I wouldn't bother unless you're gonna paint them too. They're just gonna rust up again after a few days.

 

[Venom351R]

Any thoughts on this guys? Should I clean it up before I put my wheels back on?

With as anal as you are about your car being clean Im suprised you even have to ask.

 

[Venom351R]

Tonight on PINKS

DOMESTICS VS IMPORTS !!!!!!!!!!!!!!!

 

[Dan_Soprano]

Tonight on PINKS

DOMESTICS VS IMPORTS !!!!!!!!!!!!!!!

nice! What time?

 

[Venom351R]

nice! What time?

9:00-10:00 2 shows.

 

[gaslight]

I got some 10 way Strange Engineering shocks and struts comming.

I would have gone with the QA1s. When I talked to Denny, he said some racers were having problems with the Strange pieces lasting. After a long trip they would open the trailer to find the Strange ones leaking. Not trying to burst your bubble. Hopefully they work great for you.

 

[cold96snake]

I would have gone with the QA1s. When I talked to Denny, he said some racers were having problems with the Strange pieces lasting. After a long trip they would open the trailer to find the Strange ones leaking. Not trying to burst your bubble. Hopefully they work great for you.

I thought you had those sub's welded in...(*cough* sig)

 

[whitehorseupnorth]

Any thoughts on this guys? Should I clean it up before I put my wheels back on?

Those things shouldn't rust inside of a garage. Don't even bother. Whats done is done.. A couple of good brake applications should do the trick, though the rears don't look so good..