North East SSoM Members!!!

[Dan_Soprano]

Shaw, were u driving down 295 south today around 1-2pm?

 

[Venom351R]

Hey Travis, This looks like a god deal...

http://forums.stangnet.com/showthread.php?t=663385

Thats pretty sweet but a PS3 is the next big purchase. New Engine will come later on.

 

[Dan_Soprano]

Thats pretty sweet but a PS3 is the next big purchase. New Engine will come later on.

GEEK!!!

 

[gaslight]

i'm not sleepin!!!! i only launched at 3k and i still went up in smoke....i heated them up good but to no avail....275 may not be enough tire...i figuered only making 415ish TQ they would be guess i was wrong...although i am on the stock suspension, that could be part of the problem. Anyone will tell you if your suspension isn't right your not gonna put any power to the ground

try 255 street tires! Thats what I have.

 

[gaslight]

Hey Travis, This looks like a god deal...

http://forums.stangnet.com/showthread.php?t=663385

its says .060 overbore. EEK thats a lot on a crappy stock block.

 

[gaslight]

got the head back on today. PIA getting the header back on though. Had to loosen the motor mounts and lift the engine to get the header to slip into place. Then the last two header bolts were a super pain to get started.
Now the lower intake and injectors are in place. Still need to hook up all the vac lines, wiring and put the altenator bracket back in place. Then its time to fire it up.

 

[BadVoodoo]

Shaw, were u driving down 295 south today around 1-2pm?

Nope, I didn't even leave the house yesterday.

 

[BadVoodoo]

Thats pretty sweet but a PS3 is the next big purchase. New Engine will come later on.

Here is my next big purchase

This is the level 5 axle and hub system from The Drive Shaft Shop, if you have a cobra and want to keep your IRS this is the system for you. This is the strongest and most used system in the industry. We have done small changes over the years and it ready for 950WHP and 1.3 60ft times. We are developing 2 new systems for the car; both will be complete sets including the inner C.V.'s. First will use an Explorer inner C.V. and will include a custom seal to accommodate the difference in the seal surfaces. Second will be an all new ball & cage design inner C.V. made from Chromoly. Being the system will be a ball & cage design it will eliminate the troublesome clunk from the factory tripod on some of your cars. Although not available yet the housings are made and the rest is weeks away.

 

[DoubleONegative]

A few photos from last night

 

[cold96snake]

Let me know if you plan on heading down.

I went. Wtf were you, bitch?

 

[DoubleONegative]

Tasca results?????

 

[cold96snake]

I left early. A couple of 7 second cars, mostly 11 and 12 sec cars.

No new shelby cobras.

 

[Dan_Soprano]

Shaw, just wondering if it was you I saw, I saw a tourch red 03/04 going the opposite way yesterday on 295 south in Yarmouth. Guess there is another one running around here!

Worden- still going for the 4x4 look?

 

[cold96snake]

Shaw, just wondering if it was you I saw, I saw a tourch red 03/04 going the opposite way yesterday on 295 south in Yarmouth. Guess there is another one running around here!

Worden- still going for the 4x4 look?:D

I was gonna say something, but I don't live in a glass house.

 

[Venom351R]

Worden Nice pics

Shaw- Patriots are kicking some ass!!

 

[DoubleONegative]

Worden- still going for the 4x4 look?

yeah yeah

 

[Venom351R]

Worden your bitch team is up next, they better win I picked them.

 

[Dan_Soprano]

here's a good stance!

 

[gaslight]

A few photos from last night

is that parking garage where you pick up your gay dates. HOMO

 

[Dan_Soprano]

is that parking garage where you pick up your gay dates. HOMO