Stang is on Jackstands

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Oct 30, 2009

#1

• Oct 30, 2009

• #1

Well took the car to the local smog test shop here in Cali and the car failed due to the egr. Pushed my final button with the California Laws,gave me the reason to garage it and start the madness of mods. Out with the old stock exhaust and in with new full exhaust and h/c/i setup. Should be done mid Jan. And it will be Registered in Illinois where im originally from which requires no emissions.

 

G

greengoblin95

Member

Sep 29, 2009

92

0

6

Oct 31, 2009

#2

• Oct 31, 2009

• #2

good luck, what combo are you thinking about going with?

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Oct 31, 2009

#3

• Oct 31, 2009

• #3

Good luck. I wanted a stroker engine putting out 400+rwhp, street friendly, non-forced induction over 2 years ago. I was getting there until I got some bad advice and threw 42# injectors and LT's at it. Then all hell has broken loose and its become a $$$ eater guessing game trial and error Hell. I am hoping the last bit I am dumping into it this week is final.

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Oct 31, 2009

#4

• Oct 31, 2009

• #4

going with a nice trickflow set up...buying the kit straight from trickflow. H/C/I,doing a shift kit on the tranny and full exhaust. Debating gears...i have drove it back and forth from st.louis to cali a few times so idk if i wanna be able to do that anymore or not.

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Nov 1, 2009

#5

• Nov 1, 2009

• #5

You'll be fine. I had the same kit on my 306 and it rocked. I had the 3.90 gears and it really was perfect.

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 1, 2009

#6

• Nov 1, 2009

• #6

did you have a 5 speed or auto tho? I still have the auto but didn't feel like doing to t-5 conversion so i figured a shift kit would at least improve.

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Nov 1, 2009

#7

• Nov 1, 2009

• #7

db post

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Nov 1, 2009

#8

• Nov 1, 2009

• #8

Yes, I had a 5 speed. Shift kit will make the trans last longer and pretty cool to boot. Just make sure you DO get the right gears so your car doesn't actually go slower lol. Shifting the power band up in an auto can do that.

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 2, 2009

#9

• Nov 2, 2009

• #9

yea and a suggestion on gears that WONT make it slower?

 

Pokageek

Active Member

Jun 10, 2005

2,767

0

46

MA, USA

Nov 2, 2009

#10

• Nov 2, 2009

• #10

Its preference and yo usaid you would be driving on long trips. I'd prolly go 3.90 with an auto as 4.10's would push it just over the edge for my preference. I'll find you that gear calc so you can decide for yourself. Some peeps will tell you to go 4.10 or 4.30 but dont let anyone tell you awe, its not that much difference. BS, every 125rpm adds up for every tooth you go higher. But it all comes down to personal preference. I wouldn't go less than 3.73 gears tho.

Ford Mustang: Mustang Tech: Calculators & Decoders: RPM Calculator

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 3, 2009

#11

• Nov 3, 2009

• #11

well after a year or so i doubt i will be driving more than 20-25 minutes on the highway ever...so who knows

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 6, 2009

#12

• Nov 6, 2009

• #12

Just got done taking off the stock mid-pipe and the mufflers,put the mufflers on a shelf for a later day,but mid-pipe is off for good,ran out of light and broke my drop light so tomorrow i will be taking off the smog and a/c...surprised how easily the nuts on the flange to the manifolds came off

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 7, 2009

#13

• Nov 7, 2009

• #13

Removed all the smog today,except the tube running along the back side of the block...anyone know much about it? It is just bolted there for stability correct? not any other reason i could think of

 

chaos254

Founding Member

Jul 27, 2002

467

3

29

NJ

Nov 7, 2009

#14

• Nov 7, 2009

• #14

are you talking about the metal tube that runs to the back of the head? you need to either plug that tube or plug it where it comes out of the head.

 

88stang88

5 Year Member

Apr 28, 2005

309

7

39

St. Louis,MO

Nov 8, 2009

#15

• Nov 8, 2009

• #15

yea i thought so... i believe its a 5/8 to plug the head,anyone know for sure?