• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

started replacing front end bushings today!

  • Thread starter Thread starter bamajason
  • Start date Start date Feb 13, 2010
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 13, 2010
#1
  • Feb 13, 2010
  • #1
well i started taking my front end apart today. i got it done. now to get the bushings and ball joints pressed in.
i had a few bolts that didnt want to come lose. all 4 sway bar bolts and the lower control arm bolts was hard to get out. i had to cut the driverside control arm bolt off. now i got to find somewhere to buy a new one. i guess the dealer will have one.
 

lancec2c30

Member
May 14, 2008
570
0
16
Washington
Feb 13, 2010
#2
  • Feb 13, 2010
  • #2
Is this the bolt you had to cut off?

79-04 Mustang Front Lower Control Arm Bolt by Ford at LRS - Same Day Shipping!
 
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 14, 2010
#3
  • Feb 14, 2010
  • #3
lancec2c30 said:
Is this the bolt you had to cut off?

79-04 Mustang Front Lower Control Arm Bolt by Ford at LRS - Same Day Shipping!
Click to expand...

that is it. and thanks i ordered one just now.
 

lancec2c30

Member
May 14, 2008
570
0
16
Washington
Feb 14, 2010
#4
  • Feb 14, 2010
  • #4
Late Model Restoration has a lot of parts like that for fox's.
 
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 14, 2010
#5
  • Feb 14, 2010
  • #5
lancec2c30 said:
Late Model Restoration has a lot of parts like that for fox's.
Click to expand...

yea i looked and seen alot of stuff. i will be shopping there again.

thanks again.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Feb 14, 2010
#6
  • Feb 14, 2010
  • #6
A lot of that stuff is still available from the dealer too. The front k-member and a-arm hardware didn't change up to 2004...so you can still go into Ford and pick up that bolt and not pay LRS $15 to ship it to you
 
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 14, 2010
#7
  • Feb 14, 2010
  • #7
Mustang5L5 said:
A lot of that stuff is still available from the dealer too. The front k-member and a-arm hardware didn't change up to 2004...so you can still go into Ford and pick up that bolt and not pay LRS $15 to ship it to you
Click to expand...

i ordered alot of stuff from them. i just added it to the list. got floor mats and other things.



i got the rack and pinion bushings in today. didnt take 30 minutes to do that.

also does all 5.0's come with a power steering cooler?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,121
224
Massachusetts
Feb 14, 2010
#8
  • Feb 14, 2010
  • #8
bamajason said:
also does all 5.0's come with a power steering cooler?
Click to expand...

Depends on what you consider a cooler.

They come with a looped solid line in front of the radiator. There is no finned cooler however...just a line.
 
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 14, 2010
#9
  • Feb 14, 2010
  • #9
Mustang5L5 said:
Depends on what you consider a cooler.

They come with a looped solid line in front of the radiator. There is no finned cooler however...just a line.
Click to expand...

thanks. when i was replacing the rack and pinion bushings i seen some lines running that way so i didnt know. it started to rain so i didn't have time to look into it.
 
B

bamajason

New Member
Jan 25, 2010
82
0
0
alabama
Feb 20, 2010
#10
  • Feb 20, 2010
  • #10
got it back togather today. NO MORE SQUEAK!!!!!! it drives much better now. i replaced all the bushing in the front end except the struat bushing, waiting to replace them with new struats. now to start move towards the back end. going to order some frame connectors next. then do the rear suspension.
also going to get some gears installed just haven't decided on which ones yet. 3.73 vs the 4.10.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Feb 22, 2010
#11
  • Feb 22, 2010
  • #11
I wouldn't order any bolts from 50resto. All the rear end bolts I needed were gonna be about 52 dollars +14.95 shipping. The dealer wanted just as much.

I went to the bolt supplier by work and got 4 bolts, 4 washers, and 4 nuts for $5.80. It's all grade 8 stuff. I had to by the washers because the bolts didn't have the shoulders on them like the Ford bolts. Look how much money I saved!!!



 
You must log in or register to reply here.

Similar threads

D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
420
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
209
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
298
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
181
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
C
SN95 Another Coyote swap list
  • catkiller
  • May 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
398
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 8, 2026
bjornsn95
B
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?