Starting problems!
- Thread starter xYoung347x
- Start date
im not sure what all you had powdercoated or what was R/R'd but i would double check your battery connections and the GROUNDS. battery ground and motor ground...remember juice flows from ground to positive.
if still no go, hook up a jumper battery (like a jump start). that will probably rule out the battery.
then go from there. good luck.
if still no go, hook up a jumper battery (like a jump start). that will probably rule out the battery.
then go from there. good luck.
BlackVert
15 Year Member
one click sounds to me more like the battery or the connection to the starter is weak.
what all did you have powdercoated and how much did you have to put back together?
it seems to me more likely that something came loose when you were putting it all back together than the starter all of a sudden going bad.
what all did you have powdercoated and how much did you have to put back together?
it seems to me more likely that something came loose when you were putting it all back together than the starter all of a sudden going bad.
BlackVert
15 Year Member
xYoung347x said:also the intake manifold.
post some pics of it all back together when you have a chance, ok?yep - i would just go over all the bolts you undid and reinstalled, as well as double checking the battery and ground connections. sometimes a cable that is not tightened all the way on a battery can cause intermittant problems like you have.
good luck.
good luck.
Similar threads
