• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Starting problems!

  • Thread starter Thread starter xYoung347x
  • Start date Start date Jun 27, 2004
X

xYoung347x

New Member
Nov 3, 2003
382
0
0
Jun 27, 2004
#1
  • Jun 27, 2004
  • #1
Well I put all of my powder coated stuff back on my car and fired it up acouple of times and now when I try to start it up again it won't. The fuel pump is primering and after that it has one click. Im suspecting the starter anyone agree?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 27, 2004
#2
  • Jun 27, 2004
  • #2
im not sure what all you had powdercoated or what was R/R'd but i would double check your battery connections and the GROUNDS. battery ground and motor ground...remember juice flows from ground to positive.

if still no go, hook up a jumper battery (like a jump start). that will probably rule out the battery.


then go from there. good luck.
 
X

xYoung347x

New Member
Nov 3, 2003
382
0
0
Jun 27, 2004
#3
  • Jun 27, 2004
  • #3
I tried jumping the car still no luck.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 27, 2004
#4
  • Jun 27, 2004
  • #4
one click sounds to me more like the battery or the connection to the starter is weak.

what all did you have powdercoated and how much did you have to put back together?

it seems to me more likely that something came loose when you were putting it all back together than the starter all of a sudden going bad.
 
X

xYoung347x

New Member
Nov 3, 2003
382
0
0
Jun 27, 2004
#5
  • Jun 27, 2004
  • #5
well I just started the car just 5 minutes ago so I guess its not the starter, maybe a loose ground some where like stated above.
 
X

xYoung347x

New Member
Nov 3, 2003
382
0
0
Jun 27, 2004
#6
  • Jun 27, 2004
  • #6
also the intake manifold.
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 27, 2004
#7
  • Jun 27, 2004
  • #7
xYoung347x said:
also the intake manifold.
Click to expand...
post some pics of it all back together when you have a chance, ok?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 28, 2004
#8
  • Jun 28, 2004
  • #8
yep - i would just go over all the bolts you undid and reinstalled, as well as double checking the battery and ground connections. sometimes a cable that is not tightened all the way on a battery can cause intermittant problems like you have.

good luck.
 
You must log in or register to reply here.

Similar threads

B
Electrical V8 swap no power to anything
  • Bullittsmith
  • Sep 12, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
256
1994 - 1995 Specific Tech Sep 15, 2026
Mcmahst
T
Inside is completely dead
  • TunaCar
  • Oct 18, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
301
SN95 4.6L Mustang Tech Oct 20, 2026
DadLife0724
J
Having fuel issues
  • Jbands2v
  • Monday at 2:56 PM
  • SN95 4.6L Mustang Tech
Replies
1
Views
55
SN95 4.6L Mustang Tech Monday at 4:39 PM
LILCBRA
9
1997 gt Starts then dies a few seconds after.
  • 97orange
  • Aug 13, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
280
SN95 4.6L Mustang Tech Aug 17, 2026
97orange
9
T
Help with a 95 5L crank no start
  • TheBubbaJoe
  • Nov 4, 2025
  • 1994 - 1995 Specific Tech
Replies
3
Views
558
1994 - 1995 Specific Tech Nov 5, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?