Steeda #19 Cam Specs

[WhiteCobra95]

Does anyone have a cam card for the Steeda #19? I'm surprised that they don't post it on the site. I'm looking for the detailed specs (ex. IVO, IVC, EVC, EVC, cam lift, lobe centers, etc.).

It's a lot easier to build a motor in my head if I have all of the numbers

Thanks, whitecobra95

 

[5spd GT]

Steeda #19 - 220*/226* - 280*/286* - .480"/.480" - 115* - 2,300-6,000 RPM

1.6 Roller Rockers (.006")
Intake Opening: 26* BTDC
Intake Closing: 74* ABDC
Exhaust Opening: 79* BBDC
Exhaust Closing: 27* ATDC

Recommended Valve Springs:
110lbs closed/312 lbs open

From my signature...

 

[earleys94gt]

FYI, I have the Steeda 19 and it works as advertised.

My car has a nice lope to it, but idles like stock.

 

[RIO5.0]

FWIW...

 

[WhiteCobra95]

You guys are awesome! Thank you very much.

 

[hollywoodstang]

Did you guys had to change the push rods? i have heard this cam had smaller base circle so you have to get the longer push rods... what length did you get?
Thanks

 

[poboys 94]

Did you guys had to change the push rods? i have heard this cam had smaller base circle so you have to get the longer push rods... what length did you get?
Thanks

I did, I used 6.300s.

 

[RIO5.0]

I also ended up buying 6.300 ... I shimmed em to bout 6.290 to get what I wanted using Scorpion 1.6s

 

[tjh566]

i used stock rods, been going strong for about 2 years now

 

[earleys94gt]

I used the Ford Racing one's.
http://www.jegs.com/i/Ford+Racing/397/M-6565-L302/10002/-1/748371|10225

 

[poboys 94]

i used stock rods, been going strong for about 2 years now

Just wondering if you measured yours, because I didn't untill I heard some clattering in the drivetrain, different heads and gaskets make a difference also, but I called Steeda and they confirmed about the smaller base circle.