steeda bump steer kit?

[aar0s]

any of you guys running these?

 

[Shaolin Crane]

Not a steeda one.

 

[Bryan83taco]

I just recently ordered my kit when they had it on MM deal of the day. I'm not going to be able to put them on until this winter though.

 

[aar0s]

What brand do you have SC? any problems with it?

 

[Shaolin Crane]

What brand do you have SC? any problems with it?

MM of course, no problems but i honestly think you can make one for less then $50

 

[90lxcoupe]

Im running the competiton engineering one, looks to be the same as the steeda one, but like 50 bucks cheaper. No problems with mine, there a pretty simple piece. Be sure to use locking nuts on the bottom of them

 

[aar0s]

MM of course, no problems but i honestly think you can make one for less then $50

I was told today that a mutual friend made a set for about 50 bucks. he tells me this after I dun told him that I ordered a set.

by locking nuts do you mean stop nuts with the nylon insert? how much trouble did you guys have finding someone to align the setup, I took my car in after the struts, springs and CC plates and they didn't want to do it.

damnit, i didnt see that the MM parts were on sale. this whole thing is turning into fail

 

[Shaolin Crane]

I do my own alignments, if i had to pay for an alignment every time i screwed with the suspension i'd be broke.

 

[BlackGT89]

I just recently picked up (but haven't installed) the MM tapered kit. It was on SALE ? Crap. I take my car to a local Firestone. I bought the lifetime alignment (okay it wasn't cheap), but I take them the numbers I want and they set it up to specs (CC plates and everything). I take it in when I put something new on and they have never given me any trouble about it either.

 

[aar0s]

116 for the power steering kit.
MM Bumpsteer Kits : Maximum Motorsports, the Latemodel Mustang Performance Suspension Leader!

All ive got around here are regional stores that are hard up for help. I dont think anyone stays around there for long and the people that were there have been run off.

 

[90lxcoupe]

Take your car to a shop that does suspension work. Like installing roll cages, anti roll bars, etc, they will do a better job on the alignment than any tire slinger

 

[Shaolin Crane]

Or buy the **** and learn to DIY

 

[aar0s]

Take your car to a shop that does suspension work. Like installing roll cages, anti roll bars, etc, they will do a better job on the alignment than any tire slinger

Dont have any shops like that here in BFE.

Or buy the **** and learn to DIY

Im thinking about going that route.

 

[90lxcoupe]

whats BFE?

 

[Shaolin Crane]

Butt **** eqypt

 

[stykthyn]

I use a tape measure and can get it fairly dead nuts on.

 

[aar0s]

Butt **** eqypt

and Cairo and Camel Rock isnt too far from me either!