steeda pullie install questions!

[91frppgt]

i just ordered a set of steeda underdrive pullies from brenspeed. is this a direct replacement bolt on? anything i should be aware of?

thanks alot guys!

 

[BJ1000RR]

Yea, PlEEEEEEEEEEEEEEEEEEEESE remember to put the big metal washer on the bolt that is provided to start the crank pully. I made that dumb mistake and the bolt got stuck because of bottoming out. You will understand me better after you read the directions.


p.s. its a bitch to remove a broken bolt from the crank.

 

[91frppgt]

thanks man!


did you notice any difference at all with the pullys?

 

[red05bullitgt]

Sure did..After being dyno tested on both a Mustang dyno, and then on a dynojet..my car gained 10 RWHP both times..

 

[CPman]

If you can use a impact gun to remove the crank bolt, life is much easier.

 

[kenaimone]

the directions are very straight foward. i have heard nightmares about people having oil leaks due to not using the sealeant. also if you rent the harmonic balancer puller from advance auto it is much easier. i am not sure but if you use the chrystler one it is much easier.