steering bushing

I generally go with poly just because of ease of installation. I haven't run alum and poly on the same car to have a direct comparison.

As for which to use, it depends upon what you desire. You asked if alum works, which makes one think you have an issue you're trying to correct.

Bottom line is either should work but poly is an easier install.

Good luck.
 
I just installed poly bushings on my rack and the difference isn't going to knock your socks off but the most obvious difference is more "feel". Not feel as in tire feedback as when discussing motorcycles, but more road vibration transmitted to the steering wheel. I installed mine because I was having new ball joints and outer tie rods installed and I figured while I was in there...