• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Stock 5L specs

  • Thread starter Thread starter Yourlittlepony
  • Start date Start date Apr 14, 2006
Y

Yourlittlepony

New Member
Apr 14, 2006
2
0
0
Apr 14, 2006
#1
  • Apr 14, 2006
  • #1
For the sake of some performance math can anyone tell me the following stock specs:
-Compressed head gasket thickness
-Head gasket bore
-Deck clearance
-Compression distance
-Deck clearance
-Piston relief volume
-Cam specs @ .050"
-Combustion chamber volume
-Cam timing

Thanks
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Apr 14, 2006
#2
  • Apr 14, 2006
  • #2
1) 0.040"
2) 4.100"
3) varies between about 0.002" under to 0.003" out from experience
4) 1.6" with stock 302 pistons and 5.09" rods
5) see #3
6) about 3.0cc's
7) cam....hmmm, i think it's about 206* @ 0.050" both sides
8) nominal 62cc's
9) not completely sure, but I know I saw a thread about this a while back-I believe Tmoss knows them a little better than most...I do remember a 260* total duration, and 0.444" but as far as events, I'm sorry to say I can't help you
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 14, 2006
#3
  • Apr 14, 2006
  • #3
sounds like someone got there hands on desktop dyno and needs to play with a factory 5.0L and mod it to see if great hp gods can be pleased.
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Apr 14, 2006
#4
  • Apr 14, 2006
  • #4
I was thinking someone was playing with KB's dynamic (effective) compression ratio calculator...but that's a very good possibility as well.
 
Y

Yourlittlepony

New Member
Apr 14, 2006
2
0
0
Apr 15, 2006
#5
  • Apr 15, 2006
  • #5
That someone has been canoodling with a few different programs while he builds a stake to put a 5.0L and T5 into a Volvo 242 to create the ultimate sleeper. In the meantime, knowledge is (horse)power and I need a baseline of info from which to figure out just how much bang I can get for a given buck, and thus whther or not to spend it.
 
You must log in or register to reply here.

Similar threads

1
Clearance
  • 1993mustang50
  • Apr 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
228
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 4, 2026
2000xp8
9
Forced Induction Prepping for supercharger on non-stock build
  • 91fox427
  • Nov 25, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
603
Fox 5.0 Mustang Tech Jan 5, 2026
Qtrhrse23
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?