Stock 5L specs

Yourlittlepony

New Member
Apr 14, 2006
2
0
0
For the sake of some performance math can anyone tell me the following stock specs:
-Compressed head gasket thickness
-Head gasket bore
-Deck clearance
-Compression distance
-Deck clearance
-Piston relief volume
-Cam specs @ .050"
-Combustion chamber volume
-Cam timing

Thanks
 
1) 0.040"
2) 4.100"
3) varies between about 0.002" under to 0.003" out from experience
4) 1.6" with stock 302 pistons and 5.09" rods
5) see #3
6) about 3.0cc's
7) cam....hmmm, i think it's about 206* @ 0.050" both sides
8) nominal 62cc's
9) not completely sure, but I know I saw a thread about this a while back-I believe Tmoss knows them a little better than most...I do remember a 260* total duration, and 0.444" but as far as events, I'm sorry to say I can't help you
 
That someone has been canoodling with a few different programs while he builds a stake to put a 5.0L and T5 into a Volvo 242 to create the ultimate sleeper. In the meantime, knowledge is (horse)power and I need a baseline of info from which to figure out just how much bang I can get for a given buck, and thus whther or not to spend it.