stock cam specs?

[Ozz]

Anyone wanna point me in the right direction?

 

[vikingpower]

I think its 206 @ .050, .444" lift with 1.6 rocker, 116 lobe sep.

 

[89streetbeast]

advertised duration intake: 266°
advertised duration exhaust: 266°

intake @ 0.050: 204°+
exhaust @ 0.050: 204°+

valve lift intake: 0.444''
valve lift exhaust: 0.444''

lobe sep: 116°


thats all i could find. those are at factory rocker specs.

 

[Ozz]

Thank you guys

 

[MadDAWG]

I saved these from a post I saw on corral. The guy checked his cam from an 87GT. Keep in mind that factory cams have a pretty wide tolerance so they can vary somewhat from this.

.278"/.277" lobe lift

.006" durations & timing events

266/264
IVO 16 BTDC IVC 70 ABDC
EVO 67 BBDC EVC 17 ATDC
ICL 117 ECL 115 (116 LA with 1 degree retard ground in)

0.050" durations & timing events

211/210
IVO -9 BTDC IVC 40 ABDC
EVO 41 BBDC EVC -11 ABDC

 

[FullAuto]

The '87-'88 cams are 266/266 @ .006. The '89-up cams were 276/266 @ .006. Ford never rated them @ .050. The 204+ @ .050 is just what other people have measured.

 

[Mustang5L5]

There are more than one OEM cam used on the Mustang.

 

[FullAuto]

There are more than one OEM cam used on the Mustang.

So then list them all and their differences.

 

[Mustang5L5]

So then list them all and their differences.

I don't know the specs...i only know FOrd changed the camshaft. Once was in '89 to quiet the driveline and again around '91 or so. The differences are probably too small to be important.