• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

stock heads with s/c?!

  • Thread starter Thread starter saniutza
  • Start date Start date Jun 26, 2004

saniutza

New Member
Oct 28, 2003
147
0
0
born in Transylvania, Romania...live in Lusby,MD
Jun 26, 2004
#1
  • Jun 26, 2004
  • #1
Well I just bought a s/c and the guy that had it said it made 14 psi… but he had holley heads and intake… I know it had 295 s/c pulley, but I have no clue what kind of crank pulley is… btw the s/c it’s a S-Trim V-1… with the s/c he sold me a Programable Management System by Anderson Ford Motorsport… I talked to somebody and he told me that the PMS it’s only for “hard core applications” and it’s not necessary for my application. I would like to get in the 11’s and I think I can with what I got so far… my only down side is that I couldn’t afford to buy heads so right now I’m still using the stock heads(I changed the springs and the valve seals and I cleaned the ports with a dremer tool)… is it worthed to use/keep the PMS or should I sell it? If I’ll sell the PMS I’ll probably be able to buy new heads: 185 AFR’s or Edelbrock Performer. From what I’ve read it’s ok to run 12 psi on the stock block, how much psi I would run with what I have so far with the stock heads, would that be safe? i still have the stock ignition, what kind of coil maybe a distributor should i get? somebody said a coil will be plenty...


This is what I have so far:

Stock block .30 bored, stock crank and rods, E303 cam
DSS low comp pistons, Main support, windage tray, 7qt oil pan
Griffin radiator 31*19, ARP SS 12 pt all around, Edelbrock PRM II intake manifold, 75mm TB, 80 MM mass air, 42lb injectors, high volume oil pump, 255 lph fuel pump, fuel press reg… what else?!
 
You must log in or register to reply here.

Similar threads

Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
730
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
486
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
430
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
618
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?