Stock Pulleys?

[badstang123]

I was wondering if the fox pulleys are the same as ours? Thanks guys.

 

[blksn955.o]

No, they will not work.

The 94-95's have a diff. timing cover/water pump setup that moves them closer to the block and this also makes the alt. and other acc. closer. The crank pully is preaty much flush with the harm. ball. The fox stuff is preaty far off the harm. ball. and such as they have the acc. and pumps much closer to the rad. (my guess for fans.)

 

[badstang123]

Thanks. That's all I needed to know. :SNSign:

 

[badstang123]

Since I'm not getting much feedback from my wanted add in the classifieds, does anyone have a set laying around they're willing to sell?

 

[The Green GT]

n/m

 

[Roland69]

Ha that sux I gust gave mine away to a friend

 

[95strokerPSU]

I have the water pump, crank, ps, idler, and tensioner pulley, but no alt if you're interested.

 

[The Green GT]

I have the water pump, crank, ps, idler, and tensioner pulley, but no alt if you're interested.

And I have the alt one.

 

[TheDamned]

just get some new ones off ebay or someshing, i got a some MAC ones slightly used for 110$ CND

 

[badstang123]

just get some new ones off ebay or someshing, i got a some MAC ones slightly used for 110$ CND

I already have underdrive ones. I'm trying to get a stock set again to use on the street. If I use the underdrive ones the alternator isn't putting out enough to power my electrical right on idle. I guess a couple thousand watts and a couple batteries put a strain or something

 

[MysteryMachine]

you can put the stock alt one back on and it should be fine. A lot of guys on here do it that way and say it works

 

[TheDamned]

I already have underdrive ones. I'm trying to get a stock set again to use on the street. If I use the underdrive ones the alternator isn't putting out enough to power my electrical right on idle. I guess a couple thousand watts and a couple batteries put a strain or something

ohhh my bad, tough you were talking about the u\d