• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Strange brake bleed problem...

  • Thread starter Thread starter 5.0CRAZY
  • Start date Start date Mar 11, 2008

5.0CRAZY

Founding Member
May 17, 2002
376
0
0
Frozen North
Mar 11, 2008
#1
  • Mar 11, 2008
  • #1
I swapped rear ends in my 91 coupe, still stock drum brakes. Had to transfer the rigid brake line from my original rear end to the one installed now. Im trying to bleed the brakes now and for some reason there seems to be absolutely no brake fluid comming out of the bleed screws. I can have somebody holding the brakes, crack the bleeder(s) open, and the pedal wont drop to the floor or have any change in feel at all.

I checked for fluid at the rubber line fitting to the 2 rear rigid lines and theres fluid there. No pinches in the rigid lines either. I can tell the shoes are moving when the brakes are pushed but I guess thats just trapped air pressure moving them. Could it be the drum cylinders as the brakes that came with this diff have definitely seen better days?
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Mar 11, 2008
#2
  • Mar 11, 2008
  • #2
Did you break the line loose at the wheel cylinder and see if it had fluid there?

If so take the bleeder all the way out and make sure that its clean.
 
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
Mar 11, 2008
#3
  • Mar 11, 2008
  • #3
If you have fluid at the hose at the rear end, remove the line at the wheel cylinder and see if you have fluid there. If you do, I would replace the wheel cylinders. If you don't then obviously there is a blockage in the steel line.
 
G

Goldcuffs

New Member
Mar 6, 2008
43
0
0
Mar 11, 2008
#4
  • Mar 11, 2008
  • #4
88mouse said:
Did you break the line loose at the wheel cylinder and see if it had fluid there?

If so take the bleeder all the way out and make sure that its clean.
Click to expand...

Sorry, didn't type fast enough.
 

5.0CRAZY

Founding Member
May 17, 2002
376
0
0
Frozen North
Mar 11, 2008
#5
  • Mar 11, 2008
  • #5
Yeah thats what I figured, just making sure there wasn't anything I was missing before I rip off the rigid lines because the fittings are so chewed up Im going to have to vice grip them off. And try and scrounge up some new ones some how.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 12, 2008
#6
  • Mar 12, 2008
  • #6
bleeder screws often get pluged and need to be blown out or replaced.
 
You must log in or register to reply here.

Similar threads

D
Resolved 1985 GT brake pedal problems
  • DienstXIV
  • Jun 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
676
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 2, 2025
DienstXIV
D
3
Brakes Front brakes sticking - 1988 5.0
  • 302Blue
  • Oct 18, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
588
Fox 5.0 Mustang Tech Oct 19, 2024
ustacould
1970 brake issue. Bad booster or?
  • All Stock93
  • May 13, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
10
Views
863
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2025
All Stock93
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
509
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?