• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Strange oily film on inside of windshield

  • Thread starter Thread starter bcmbcmbcm
  • Start date Start date May 25, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

f8tlfiveo

My wife likes my spool and blow-off valve.
Aug 8, 2007
1,585
102
64
Lancaster, PA
Dec 18, 2013
#21
  • Dec 18, 2013
  • #21
Ourobos said:
I've done a lot of mechanical work, and the heater core is probably one item I would almost pay someone else to do. Realistically, first time out, it's a 6 hour job, but doable. If you bypass the hoses, make sure you run your U-hose on the hard heater lines, dont loop the dead core together instead (how it sounded to me). You could just not use the heater/defront until you swap it, it doesn't circulate through there unless it's on.

Brandon
Click to expand...
Not a 6 hour job, I did it in 3 by myself.. If you know where all the screws and bolts that need loosened are it makes it much faster. There is a good write up here somewhere that I used..
 

f8tlfiveo

My wife likes my spool and blow-off valve.
Aug 8, 2007
1,585
102
64
Lancaster, PA
Dec 18, 2013
#22
  • Dec 18, 2013
  • #22
SILENTPANDA25 said:
omg yall are mustang fanatics an you cant take out the dash??
Click to expand...

Yeah that's what I was thinking. I actually was thinking about putting an ad on Craigslist to do this job for money. I was always told its a 6 hour job, but it isn't
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,498
21,671
234
Box behind Walmart
Dec 18, 2013
#23
  • Dec 18, 2013
  • #23
Yes, it's a heater core.
Yes, it's a pain in the ass.
Yes, it can be done with common tools.
Yes, it will likely take a 1st timer 6 or more hours.
No, the carpet doesn't need to be wet for it to be a heater core. If the A/C drain line is working, then a leaking core would be draining into the front of the engine bay. Look in the bay and look under the car for signs of coolant. You'll find it, even if it's a small spot.
 

mikestang63

SN Certified Technician
Aug 27, 2012
11,606
8,859
214
In the garage
Dec 18, 2013
#24
  • Dec 18, 2013
  • #24
I'm thinking the OP fixed the problem by now....8 years later.
 
Reactions: A5literMan and Noobz347

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,498
21,671
234
Box behind Walmart
Dec 18, 2013
#25
  • Dec 18, 2013
  • #25
mikestang63 said:
I'm thinking the OP fixed the problem by now....8 years later.
Click to expand...


I didn't even look at that.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

O
Sooty/Oily Front Engine & Pulleys
  • ozenator
  • Jun 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
421
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 22, 2026
Blackhawkxx
Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
205
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
A
Catch can questions.
  • AngryH58
  • Sep 26, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
125
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2026
squeak93
J
Rear alignment issues
  • Jayjay001
  • May 27, 2026
  • 2015 - 2023 (S550) Mustang -General/Talk
Replies
1
Views
145
2015 - 2023 (S550) Mustang -General/Talk May 27, 2026
Noobz347
Brakes Front Brake Hardline Routing
  • 93Nifty
  • Sep 11, 2026
  • Fox 5.0 Mustang Tech
Replies
11
Views
300
Fox 5.0 Mustang Tech Oct 11, 2026
limp
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?