Stroker Crank Balancing

[rd]

Most of the stroker crank kits I see are for 28 oz balance. I just found a 97 roller cam block with a one pc rear seal, meant for a 50 oz crank.

Can I use an old two pc rear seal, 28 oz crank in this block, or, whats the best/least expensive stroker option for this block.

Thanks.

 

[SScott]

You sure can. You just have to grind off the slinger on the back of the crank to use in a 1 pc block, some are already ready to go into a 1 pc block, either way, it is not hard.

 

[rd]

Thanks. If I can ever get repairs and stuff caught up I am putting together a stroker.