rd Founding Member Jan 12, 2000 3,316 63 109 Ocean Springs MS Apr 26, 2010 #1 Apr 26, 2010 #1 Most of the stroker crank kits I see are for 28 oz balance. I just found a 97 roller cam block with a one pc rear seal, meant for a 50 oz crank. Can I use an old two pc rear seal, 28 oz crank in this block, or, whats the best/least expensive stroker option for this block. Thanks.
Most of the stroker crank kits I see are for 28 oz balance. I just found a 97 roller cam block with a one pc rear seal, meant for a 50 oz crank. Can I use an old two pc rear seal, 28 oz crank in this block, or, whats the best/least expensive stroker option for this block. Thanks.
SScott Powered by LORD Apr 23, 2004 304 0 16 Alabama May 6, 2010 #2 May 6, 2010 #2 You sure can. You just have to grind off the slinger on the back of the crank to use in a 1 pc block, some are already ready to go into a 1 pc block, either way, it is not hard.
You sure can. You just have to grind off the slinger on the back of the crank to use in a 1 pc block, some are already ready to go into a 1 pc block, either way, it is not hard.
rd Founding Member Jan 12, 2000 3,316 63 109 Ocean Springs MS May 6, 2010 #3 May 6, 2010 #3 Thanks. If I can ever get repairs and stuff caught up I am putting together a stroker.