• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

strut tower braces anyone?

  • Thread starter Thread starter neikoblu
  • Start date Start date May 28, 2006

neikoblu

New Member
May 9, 2005
63
0
0
Barksdale AFB, Lousyanna
May 28, 2006
#1
  • May 28, 2006
  • #1
I am having bad luck finding a brace that will clear my intake. It's and Edel. Performer 2 intake with an 1"1/2 intake spacer. If any of you have seen the Performer 2 intake it is rather large, (kinda like Trick Flow's older intake). Anyone have a brace with this combo or close to it? Maybe a little help finding a brace to even clear it. I can't take the spacer out otherwise it won't bolt down flush b/c it will hit the valve covers.
 

Repostyle

Member
Jun 11, 2005
538
0
16
Portland, OR
May 28, 2006
#2
  • May 28, 2006
  • #2
I think Maximum Motorsports has one that goes straight accross without going back to the firewall. That should clear by crossing over in front of your intake instead of over the top.
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
May 28, 2006
#3
  • May 28, 2006
  • #3
I don't know if the Maximum Motorsports strut tower brace will work with your intake. Here are a few pics of my GT. I still have the stock intake.

Hope this helps.

Keith



 

hollywoodstang

Active Member
May 23, 2006
1,095
2
36
May 28, 2006
#4
  • May 28, 2006
  • #4
you have to get the open strut. i just bought smr strut tower brace and it wont fit over my edle either...but i am going with cobre intake anyway...but yeah you have to go with the open brace.

i hope this helps...or you can use other after market single cross brace and modify it a little and make it fit. you can just strong weld the eachend and it will work fine.
 

neikoblu

New Member
May 9, 2005
63
0
0
Barksdale AFB, Lousyanna
May 29, 2006
#5
  • May 29, 2006
  • #5
Duner, that one looks like it would work! I will have to see what their return policy is but I might give that one a try. If not I will just use one that goes straight across. Do any of you know the pros and cons of a brace that doesn't bolt to the firewall as well?
 

DMAN302

My mom says thanks for the pearl necklace.
Nov 8, 2003
2,120
2
59
windsor, Canada
May 29, 2006
#6
  • May 29, 2006
  • #6
Droped the BBK chrome pc on to take a look the other day, though I did not take it there were no clearance issues at all with my Typhoon (same dimensions as the RPM).
 

duner

Mr. Warmth
Jul 21, 2003
1,756
3
0
Oregon
May 29, 2006
#7
  • May 29, 2006
  • #7
neikoblu said:
Duner, that one looks like it would work! I will have to see what their return policy is but I might give that one a try. If not I will just use one that goes straight across. Do any of you know the pros and cons of a brace that doesn't bolt to the firewall as well?
Click to expand...

There's plenty of discussion on weather a STB is worthwhile. Go check out http://corner-carvers.com/forums/index.php? and do a search. Those guys are hardcore racers and engineers.

Here's link to get you started
http://corner-carvers.com/forums/showthread.php?t=448&highlight=strut+tower+brace

Another
http://corner-carvers.com/forums/search.php?searchid=548823

Some people swear they make a difference and others don’t. I installed the STB because I’m running coil-overs. Since the coil-overs put the entire load of the front suspension on the strut towers, it seemed like a good idea to install the brace.

If you are going to install the brace, get one that connects the towers to the firewall.

Maximum Motorsports are well known for their excellent parts and top-notch customer service. Give them a call. They may be able to answer the question about the intake clearance.

BTW don't register at corner carvers. Just read and search.
 

Bad92GT

The 5 Minute Plan Man
Jun 10, 2004
492
0
0
SC
May 29, 2006
#8
  • May 29, 2006
  • #8
FOR THE FACT and not having to worry about it.. ford racings STB is built to clear the eddy and typhoon intakes.. its the only one known to work (or so says the seller)
 

sirr0bin

New Member
Jul 18, 2003
174
0
0
Winnipeg, Manitoba
May 29, 2006
#9
  • May 29, 2006
  • #9
Maximum motorsports advertises that their brace will clear all intakes for the mustang. I'm very happy with mine, and it definately made a large improvement with my turn in/understeer issues
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
505
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
496
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
512
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Exhaust 1 3/4” Long Tubes on a Fox Body AOD – Easiest route?
  • 5.0 Mike
  • Mar 19, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech Mar 21, 2025
5.0 Mike
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
189
The Welcome Wagon Jul 3, 2026
5150K
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?