Strut Tower repair

My last fox hatch I cut out the frame rails from firewall to rad support.I did it one side at a time supporting the car.The rails are straight and I used 2x3 .125 wall to replace them.If you can fabricate it can be done,the first side took awhile but the second side was almost cake.I had the motor/trans out,thats the only way.I installed a QA1 K-member,bolted it to the 2 body bolts,squared it and drilled the holes at the frame rails.Search my posts and you'll find pics.I haven't seen anyone else do it,but is much stronger then stock and hard to tell visually if done santitary.