Subframe Connectors

[88Stangboy]

I had some left over raw steel after building my utility trailer so i fabbed up my own connectors, might be a slight bit heavier but their stiff as a bastard.

 

[Henceforward]

Maximum Motorsports Full Length Sub Frame Connectors.

They are a must on any Fox Body Stang.

I had mine installed on my GT convertible for $225. (More because the vert requires more work) Install is not that simple either. 3 hours easy.

Bare steel
MMFL-1B
$119/set

 

[CoupedUp]

............... I will have to check them again, what do full lengths run from and to? any pics? ..........

I'm going to be farting around in the garage tonight after work, so if I get the time, I will snap a couple of pics of my GW set for you so you can see where they mount exactly.

 

[jammer84_03]

no mension of the kenny brown subframe matrix with connectors?

 

[2000xp8]

no mension of the kenny brown subframe matrix with connectors?

Global west has a similar setup to add to theirs.

And i've poked around under hundreds of mustangs, and one look tells you that the MM's and global wests are stronger than the KB's.

Besides i don't think (could be wrong) KB offers their set pre-welded like global west, and from what i'm told their is some serious extra time involved and getting them all welded up.

 

[Marks5.0!]

MM full lengths on my 93, car felt completely different once they were on, by far the best investment type mod i ever made

 

[fiveohGT]

What is the advantage of having Tri-tube rocker rail supports with your global west subframes?

 

[5.0 Nostalgia]

They provide extra support. You don't really need that set up unless you are going crazy with hp.

www.globalwest.net

http://www.globalwest.net/mustang 79-98.htm#Subframe connectors:

 

[fiveohGT]

They provide extra support to the chassis or do they fuction the same as the jacking rails in the matrix design?

 

[livenfine]

Remember-If you plan to autocross-skip the SFCs!!!

 

[Roland69]

Full length ones are 5 feey long correct

 

[dbdragracing]

I just got my Maximum Motorsports full length powdercoated subframe connectors today....they look great! I say they are probably 5ft long too. This afternoon I have to stop down at the muffler shop and see if they will weld them in for me.