• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

supercharger pics

  • Thread starter Thread starter Foxfan88
  • Start date Start date Aug 5, 2007

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 5, 2007
#1
  • Aug 5, 2007
  • #1




 

Attachments

  • pic1126.webp
    58.5 KB · Views: 140
  • pic1125.webp
    57.8 KB · Views: 157
  • pic1127.webp
    39.9 KB · Views: 167

ryan218

In just 10 years, I'll be old enough to drive!!!!
Dec 28, 2005
0
1
38
columbus ohio
Aug 5, 2007
#2
  • Aug 5, 2007
  • #2
neat...get it tunned and hit the track...
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 5, 2007
#3
  • Aug 5, 2007
  • #3
yeah i am needing to mess with it some more getting it going real good.

i have a camcorder to shoot video but no cable to get it on the computer. once i get that i will upload vids
 

Blown83GT

New Member
Sep 20, 2004
35
0
0
South Jersey
Aug 5, 2007
#4
  • Aug 5, 2007
  • #4
Nice pics.

The line going from the air box through the little filter needs to go to the valve cover. The t/b fitting gets capped. You are sending boost out the line right now.

 

Attachments

  • pic1126.webp
    58.5 KB · Views: 142

DigitalGhost

New Member
Nov 10, 2006
18
2
0
Portland, OR
Aug 5, 2007
#5
  • Aug 5, 2007
  • #5
That looks terrible. Just awful. You should rip the whole supercharger system out and send it to me. I'll take it off your hands.













Seriously though, looks good.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Aug 5, 2007
#6
  • Aug 5, 2007
  • #6
That is the A-Trim right?
 
P

pack018

New Member
Jun 3, 2007
9
0
1
Bergen County, NJ
Aug 5, 2007
#7
  • Aug 5, 2007
  • #7
nice...! any numbers yet?
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 5, 2007
#8
  • Aug 5, 2007
  • #8
Blown83GT said:
Nice pics.

The line going from the air box through the little filter needs to go to the valve cover. The t/b fitting gets capped. You are sending boost out the line right now.

Click to expand...
i see now, makes more sense than the way i have it

i had wondered about that, i must have misread that, you think i would notice a gain moving where it should be? lol i'll have to fix it.

from the looks of it could be running lean like that, the engine can get unmetered air through it and run lean

i dont have numbers yet, i just got it done yesterday, i drove it maybe an hour and the old junker smog pump i used locked up on me and smoked and tore up my accessory belt. i will get a smog eliminator kit and be done with it.

but i can tell you it ran real good. just starting it up and driving it made a nice difference. no tune or anything it really made the car feel like a feather, would just get up and go. i need to get a boost gauge so i can see what boost its making, i have no idea what its making now.

all i have to do now it work out the bugs and get her dialed in and then i will make a trip to the track. i know for sure its deep into the 12s now. the difference was amazing

and its not an A trim its the SC trim, its pretty much the same thing, they dont make the a trim anymore. but this SC is basically the same thing. i think it flows a bit more than the a trim

and to my suprise the blower isnt too loud, ive heard alot of v1 compressors on the internet and they seemed loud. my friend has an old v1 A trim kit and his seems louder than mine. mine just doesnt seem loud, you can hardly hear it inside the car. maybe they get louder after they get some miles on them? i duno
 

Attachments

  • pic1126.webp
    58.5 KB · Views: 141

pistonhead351

flim hunter
May 1, 2005
75
0
0
Aug 5, 2007
#9
  • Aug 5, 2007
  • #9
you better hope it doesnt get louder with miles!!! looks good man.
 

88mouse

New Member
Apr 18, 2007
630
0
0
Mooresville nc
Aug 5, 2007
#10
  • Aug 5, 2007
  • #10
Any other mods to the car? besides the intake.
 

poneypower89

Now everyone in the world will know I wanna bang t
Dec 6, 2004
0
3
28
Indianapolis, Indiana
Aug 6, 2007
#11
  • Aug 6, 2007
  • #11
The sc-trim really isnt even close to an A-trim actually.

Its MUCH MUCH more closely related to the S-trim than the A.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 6, 2007
#12
  • Aug 6, 2007
  • #12
yeah i mean as far as the boost levels go, it makes the same boost out of the box on a stock 5.0 as the a trim did. AFAIK the SC trim is pretty much the same as the S, just the gearing warrants you to turn the SC faster to achieve boost levels the S trim can get with less turning.

and the car has thumper e7s
b-cam with 1.7s
typhoon intake
bbk headers
catless H
flowpath mufflers
z spec t5
alum ds
3.90 gears and all the little stuff

it ran 13.30s before the SC and i know for sure its in the 12s lol
 

just4bob50

Active Member
Apr 2, 2005
504
5
28
Pa.
Aug 6, 2007
#13
  • Aug 6, 2007
  • #13
If you dont pick up what you think you should with the charger, I would consider swaping out the B-cam. When i did my cam a while back every tuner I talked to said the b-cam wasnt great for boost. Im not recommending anything i just thought it was something to consider. By the way, it looks good. Deffinatly change those lines around.
 

grey5.0beast

Cookies should never be DUNKED!!!
Aug 3, 2004
0
1
0
atl ga
Aug 6, 2007
#14
  • Aug 6, 2007
  • #14
boost
 

fiveohwblow

Official Member
15 Year Member
Jul 21, 2005
2,169
145
155
Aug 6, 2007
#15
  • Aug 6, 2007
  • #15
I have that same s/c and I have since changed EVERYTHING to make it complimented like the S trim is.. lol I even have two different pulleys if you are interested in more boost.. Anyways, I highly reccomend a diff pulley, AFM powerpipe, and getting rid of that afformentioned tube in favor of a filter that sits atop your valve cover. I was getting alot of oil coming out of that and onto my air filter. You do have it in the right place per Vortech specs btw. I have now switched to an 8 rib setup and I am loving that. Also, it would take forever, but you might wanna look into getting an aluminum discharge tube as the extreme heat will cause the abs plastic to eventually crack. Honestly it would take some time, but just what I have learned along the way!
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 6, 2007
#16
  • Aug 6, 2007
  • #16
yeah i have been thinking of junking the b-cam for a while now. it works good but i feel there is some power to be had with a better cam. what are some good OTS blower cams for a mild street/strip application?? and how much money would a custom grind set me back. that may work better. just need some cam opinions

i didnt have a boost gauge or anything, but the car would pull and then once 4k hit it all of a suddenly gained ALOT of power. what i am thinking happened is my mis-routed vent tube, was bleeding off boost back into the airbox at midrange and once it got to higher rpms like 4k+ there would be so much air coming in the line wouldnt be able to take anymore so the air went into the engine like its supposed to. if i put the line to the valve cover like its supposed, it wont be acting like a blowoff valve stuck open lol... the instructions really confused me, it sounded like it said to put it on the TB then i looked again and it said to cap the TB

i have the smog eliminator and a boost gauge on the way. i am also probably going to make my own timing pointer and put it on the drivers side where i can see it, find TDC and mark the balancer and know where my timing is at. the car is alot more touchier on timing with the SC on it, going to have to find the sweet spot that she likes.

once i get all these things sorted out i cant wait to hot rod it some. i only got to drive it for maybe 45 mins.

cant wait lol
 
You must log in or register to reply here.

Similar threads

Supercharger and What else do I need? 1990 Saleen Vert 5spd
  • AlbertaGolfer68
  • Aug 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
765
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
General karthief
A
Info on roots style supercharger that mounted on bracket to front of engine??
  • Ar15cobra
  • Dec 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
280
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 5, 2025
Ar15cobra
A
S650 Pics!
  • 85GT4V
  • Sep 7, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
2
Views
317
2024+ (S650) Mustang -General/Talk Oct 5, 2026
Noobz347
Need some camshaft guru advice on power loss from supercharger to nitrous
  • TTSaleen
  • Dec 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
18
Views
983
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 29, 2025
revhead347
S
Engine Belt routing with supercharger and smog/ac/ps delete
  • Steve6482
  • Jul 15, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
157
Fox 5.0 Mustang Tech Jul 15, 2026
Steve6482
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?