supercharger pics

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
pic1126.webp


pic1125.webp


pic1127.webp
 

Attachments

  • pic1126.webp
    pic1126.webp
    58.5 KB · Views: 139
  • pic1125.webp
    pic1125.webp
    57.8 KB · Views: 156
  • pic1127.webp
    pic1127.webp
    39.9 KB · Views: 166
yeah i am needing to mess with it some more getting it going real good.

i have a camcorder to shoot video but no cable to get it on the computer. once i get that i will upload vids
 
Nice pics.

The line going from the air box through the little filter needs to go to the valve cover. The t/b fitting gets capped. You are sending boost out the line right now.

pic1126.webp
 

Attachments

  • pic1126.webp
    pic1126.webp
    58.5 KB · Views: 141
Nice pics.

The line going from the air box through the little filter needs to go to the valve cover. The t/b fitting gets capped. You are sending boost out the line right now.

pic1126.webp
i see now, makes more sense than the way i have it

i had wondered about that, i must have misread that, you think i would notice a gain moving where it should be? lol i'll have to fix it.

from the looks of it could be running lean like that, the engine can get unmetered air through it and run lean

i dont have numbers yet, i just got it done yesterday, i drove it maybe an hour and the old junker smog pump i used locked up on me and smoked and tore up my accessory belt. i will get a smog eliminator kit and be done with it.

but i can tell you it ran real good. just starting it up and driving it made a nice difference. no tune or anything it really made the car feel like a feather, would just get up and go. i need to get a boost gauge so i can see what boost its making, i have no idea what its making now.

all i have to do now it work out the bugs and get her dialed in and then i will make a trip to the track. i know for sure its deep into the 12s now. the difference was amazing

and its not an A trim its the SC trim, its pretty much the same thing, they dont make the a trim anymore. but this SC is basically the same thing. i think it flows a bit more than the a trim

and to my suprise the blower isnt too loud, ive heard alot of v1 compressors on the internet and they seemed loud. my friend has an old v1 A trim kit and his seems louder than mine. mine just doesnt seem loud, you can hardly hear it inside the car. maybe they get louder after they get some miles on them? i duno
 

Attachments

  • pic1126.webp
    pic1126.webp
    58.5 KB · Views: 140
yeah i mean as far as the boost levels go, it makes the same boost out of the box on a stock 5.0 as the a trim did. AFAIK the SC trim is pretty much the same as the S, just the gearing warrants you to turn the SC faster to achieve boost levels the S trim can get with less turning.

and the car has thumper e7s
b-cam with 1.7s
typhoon intake
bbk headers
catless H
flowpath mufflers
z spec t5
alum ds
3.90 gears and all the little stuff

it ran 13.30s before the SC and i know for sure its in the 12s lol
 
If you dont pick up what you think you should with the charger, I would consider swaping out the B-cam. When i did my cam a while back every tuner I talked to said the b-cam wasnt great for boost. Im not recommending anything i just thought it was something to consider. By the way, it looks good. Deffinatly change those lines around.
 
I have that same s/c and I have since changed EVERYTHING to make it complimented like the S trim is.. lol I even have two different pulleys if you are interested in more boost.. Anyways, I highly reccomend a diff pulley, AFM powerpipe, and getting rid of that afformentioned tube in favor of a filter that sits atop your valve cover. I was getting alot of oil coming out of that and onto my air filter. You do have it in the right place per Vortech specs btw. I have now switched to an 8 rib setup and I am loving that. Also, it would take forever, but you might wanna look into getting an aluminum discharge tube as the extreme heat will cause the abs plastic to eventually crack. Honestly it would take some time, but just what I have learned along the way!
 
yeah i have been thinking of junking the b-cam for a while now. it works good but i feel there is some power to be had with a better cam. what are some good OTS blower cams for a mild street/strip application?? and how much money would a custom grind set me back. that may work better. just need some cam opinions

i didnt have a boost gauge or anything, but the car would pull and then once 4k hit it all of a suddenly gained ALOT of power. what i am thinking happened is my mis-routed vent tube, was bleeding off boost back into the airbox at midrange and once it got to higher rpms like 4k+ there would be so much air coming in the line wouldnt be able to take anymore so the air went into the engine like its supposed to. if i put the line to the valve cover like its supposed, it wont be acting like a blowoff valve stuck open lol... the instructions really confused me, it sounded like it said to put it on the TB then i looked again and it said to cap the TB

i have the smog eliminator and a boost gauge on the way. i am also probably going to make my own timing pointer and put it on the drivers side where i can see it, find TDC and mark the balancer and know where my timing is at. the car is alot more touchier on timing with the SC on it, going to have to find the sweet spot that she likes.

once i get all these things sorted out i cant wait to hot rod it some. i only got to drive it for maybe 45 mins.

cant wait lol