• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Supercharger question

  • Thread starter Thread starter mustangfan1990
  • Start date Start date Feb 20, 2008

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 20, 2008
#1
  • Feb 20, 2008
  • #1
ok I have the BTM box. ON the front on th ebox it has a screw that says starting point and the numbers range from 0-5. I have it set on 2. Now if I am running 8 pounds of boost what should my control knob read ( it has a setting from 0-3). Right now I have my timing set at 10 degress. I need to know at 8 pounds what should I run the starting point at on the BTM box and what should I set at the control knob?
 
B

BYRDPE

Founding Member
Nov 4, 1998
1,556
0
37
Memphis,Tn.
Feb 21, 2008
#2
  • Feb 21, 2008
  • #2
Your best bet is to get a tune.
However you can start with pulling 2 degrees of timing and work your way from there until you experience detonation at the top of 3rd & 4th.
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 21, 2008
#3
  • Feb 21, 2008
  • #3
well how else can I determine detanation, because between my engine being so loud and that loud ass t-rex fuel pump I cant hear detnantion wwhen it does happen. Would there be a miss?
 
F

frcefedlx

New Member
Dec 6, 2004
184
0
0
Feb 22, 2008
#4
  • Feb 22, 2008
  • #4
that is the starting point for the timing retard. The base kits with 5psi dont even pull timing. I set mine up to 5 and at 5psi it will then start to pull however many degree's of timing per psi the big adjustment knob is set at. It is just a starting point. That is how I understood it when I read the instructions.
 

mustangfan1990

New Member
Jul 17, 2005
505
1
0
Lenoir, North Carolina
Feb 22, 2008
#5
  • Feb 22, 2008
  • #5
yeah but mines not the starter kit mine is suppose t omake 8-10
 
You must log in or register to reply here.

Similar threads

Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
168
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Forced Induction Total Timing under boost
  • Dontknowchit
  • Aug 27, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
429
Fox 5.0 Mustang Tech Aug 28, 2025
Dontknowchit
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
F
86 notch NEED HELP!!!!
  • foxbody86
  • Jul 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
165
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 9, 2026
Noobz347
B
Electrical V8 swap no power to anything
  • Bullittsmith
  • Sep 12, 2026
  • 1994 - 1995 Specific Tech
Replies
4
Views
296
1994 - 1995 Specific Tech Sep 15, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?