is is too hard to install new springs ,shocks & struts, lcas , ect.. without a lift i want to get some new suspension parts and to save some cash i wanted to do the install myself.
suspension install
- Thread starter 00Blackgtvert
- Start date
I've done it all with just some jackstands00Blackgtvert said:
fairly basic stuff where in the north east are ya? pocono area?
![[Twitch]](https://cdn.stangnet.com/data/avatars/s/82/82982.jpg?1322929337){kind=avatar}
tomustang said:I've done it all with just some jackstands
where in the north east are ya? pocono area?
Same here, took me 4 hours to do springs, shock & struts and swaybars. It was my first time doing suspension on any car too. Just remember to place the springs tails in the exact same position as the old ones. On the front springs, the lower A-arm has 2 holes in it(you might have to clean out the dust and rust to see it), remember to cover only one hole and not both.
steveb24
New Member
anyone wana help me put the stuff listed below on? or any of it? 
i was planning on a shop doing it but hey, if it could be done for alot cheaper i would like to do that, and most importantly ill know how to do it.
i was planning on a shop doing it but hey, if it could be done for alot cheaper i would like to do that, and most importantly ill know how to do it.
gtvertsoon
New Member
Just finished my install today in a little less than 4 hours with 2 guys, a jack, 2 jackstands, and 2 craftsman mechanics sets of tools. Tokico HP shocks/struts, and springs. Cake install but not low enough I'm afraid 
Chili
New Member
My buddy put on my springs in just under two hours with 4 jackstands and a floor Jack in his garage start to finish.. He's done it quite a few times though.
mity2
I like Pro3 and all I got was this crappy CT.
Yes Springs are pretty easy to do. Did you install your LT yourself? because if you did, thenyou'll prolly know how, and have ability to do it yourself
here is how to
http://www.mustangworld.com/ourpics/fcar/steedaspring1.htm
I would help you, but Wilks Barre is bit too far to drive just give you hand man...
here is how to
http://www.mustangworld.com/ourpics/fcar/steedaspring1.htm
I would help you, but Wilks Barre is bit too far to drive just give you hand man...
Here is mine we did this past weekend. 4 jack stands and a jack.
http://forums.modulardepot.com/showthread.php?s=&threadid=80350
http://forums.modulardepot.com/showthread.php?s=&threadid=80350
