• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Suspension Lift?

  • Thread starter Thread starter Riggs
  • Start date Start date Jan 9, 2009
R

Riggs

Member
Mar 31, 2005
151
0
17
Linden, NJ
Jan 9, 2009
#1
  • Jan 9, 2009
  • #1
I know this is like anti what everyone does but if it possible to raise the suspension on my mustang from the stock height? I was doing some research online to see if there are any kits out there but there seems to be nothing. Some people have put stock GT500 suspensions on their mustangs but weren't 100% sure if it raised the car any. I would like to raise it up a 3/4 inch to an inch.
 

Steel Horse

Member
Oct 28, 2008
0
0
16
Altoona, IA
Jan 9, 2009
#2
  • Jan 9, 2009
  • #2
I haven't heard of any kits like this. Ok.. I'll get it out of the way now...Why???
 

NastyStang113

New Member
Sep 12, 2008
1,567
1
0
Florida
Jan 9, 2009
#3
  • Jan 9, 2009
  • #3
Seriously?
 

Riverart

Well-Known Member
Oct 29, 2007
171
39
59
Ontario, CA
Jan 9, 2009
#4
  • Jan 9, 2009
  • #4
I think you can achieve this by using a spring pad.
 
R

Riggs

Member
Mar 31, 2005
151
0
17
Linden, NJ
Jan 9, 2009
#5
  • Jan 9, 2009
  • #5
Cause roads in NJ especially around my area are horrible and there are pot holes 6-10 inches deep.
 

bigcat

start with the upper hole, and if more traction is
May 1, 2005
3,015
1
79
7200 feet
Jan 9, 2009
#6
  • Jan 9, 2009
  • #6
probably gonna need a custom panhard bar made to lengthen, not shorten from stock. also, i doubt you will find a set of lift springs marketed for mustangs. gonna have to find a set made for something else and retrofit it, or have custom springs and shocks/struts made for this application.

looking at large amounts of green to accomplish this. you are better off slowing down a bit, and driving defensively to avoid these craters. also, write your department of roads and complain that they are not repairing the streets fast enough to avoid major damage to them and vehicles. do they use tar to seal cracks before winter comes? that is a huge improvement in itself. potholes are created when water gets into the cracks and freezes. the expansion causes the potholes to appear and even worsen. the tar seals out the water before it gets to this stage.
 
R

Riggs

Member
Mar 31, 2005
151
0
17
Linden, NJ
Jan 10, 2009
#7
  • Jan 10, 2009
  • #7
Yeah i'm aware how streets crack and all and its just dumb because they don't use tar they just fill the potholes every year in the same spot and in 6 months they are back again. They need to pave the whole street again. Jersey road depts aren't the best, atleast around here
 
W

Wind-Farmer

Member
Sep 2, 2008
268
1
18
Minnesota
Jan 10, 2009
#8
  • Jan 10, 2009
  • #8
Airbags....or buy truck.
 
O

o0Dan0o

Founding Member
Feb 8, 2001
485
1
0
Jan 10, 2009
#9
  • Jan 10, 2009
  • #9
A set of coil-overs with adjustable spring perches. Most are $1-2k. Then you'll need to get some longer coil-over springs from a company like Eibach, for around $150 a pair. You can just get the adjustable perch for the rears and not the new dampeners to save some.

I might be able to get someone to machine some spring seats for you out of a suitable material, but that's that hack way to do it. I would just drive as carefully as possible...
Dan
 

DarkFireGT

Playing with my wife's really makes me want one.
10 Year Member
May 23, 2004
692
10
89
East Moline, IL
Jan 10, 2009
#10
  • Jan 10, 2009
  • #10
Here ya' go.



Seriously, though. If this is something you feel you must do, check with a shop that sets up "donks". They'll know what needs to be done. It'll look silly, seeing as they already sit too high. But that's a personal decision you'll have to make. Plenty of high dollar cars in Jersey, and I doubt any of them have lifted their vehicle because of the roads.
 

Attachments

  • mustang_4X4.webp
    8.5 KB · Views: 6,251

Mr_Q

Founding Member
Nov 5, 2002
721
8
48
Burbank, CA
Jan 10, 2009
#11
  • Jan 10, 2009
  • #11
So with the pot holes, as deep as you say they are, your car is bottoming out? Your front bumper is slamming in to the pavement? Really???

You could try putting some 19" wheels with 50 series rubber. that would give you an almost 1.5" lift.

Buy a truck or SUV if it's truly that bad though.
 
B

BLAKDOUT

New Member
Nov 7, 2008
85
0
0
Jan 10, 2009
#12
  • Jan 10, 2009
  • #12
 

walter

Founding Member
Aug 13, 1998
1,054
0
46
Houston TX
Jan 11, 2009
#13
  • Jan 11, 2009
  • #13
Forget the suspension lift. Get yourself a set of 17in wheel/tires if you don't already have them get some tires with a tall sidewall. The wheel/tire combo should be light and the sidewall should soften the impacts.
 

Sparty92

Member
Jul 30, 2007
430
5
19
Detroit Burbs
Jan 11, 2009
#14
  • Jan 11, 2009
  • #14
Here are two suggestions.

1. Buy a winter car.
2. Move.
 
S

stalkercobra89

New Member
Jun 19, 2005
30
0
0
Jan 28, 2009
#15
  • Jan 28, 2009
  • #15
i hate to be a kill joy but i live in jersey and i know about bad road departments and i know these craters you speak of and i still dropped my car an inch and have not had a problem once with scraping now my 2 inch lowered focus with a mach 1 lip thats a different story plus i have the gt/cs package to make it even lower so i cant imagine your having that bad of problems but if your all gung ho about it just do what everyone else said something between 18 and 20 inch wheels and a slighlty larger tire size that should do it
 

SlideWRX

Member
Jan 8, 2007
126
1
16
Westland, MI
Jan 31, 2009
#16
  • Jan 31, 2009
  • #16
Don't know if you have the 17" stock wheels or the 18" stock wheels, but if you are really worried, start with the 17" stockers and put a 235/60 tire (since it is for winter, a winter tire or good all-season) on it, it will give you a one inch larger tire, which raises the car a half inch. With a sidewall that tall, I would think the potholes wouldn't be a problem.

For a while there here in the Detroit area we were getting to where the top layer of the ashplalt was getting torn off in huge chunks, producing those huge potholes. I'm running snow tires that are slightly smaller than stock (225/55R17), and haven't had an issue.
 
You must log in or register to reply here.

Similar threads

Suspension End link replacement size
  • Teen'93stang5.0
  • May 12, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
156
Fox 5.0 Mustang Tech May 20, 2026
Teen'93stang5.0
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
55
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
5
Foxbody Intro
  • 5.0Sucio
  • May 26, 2026
  • The Welcome Wagon
Replies
1
Views
119
The Welcome Wagon May 26, 2026
Noobz347
J
For Sale MASTER LISTING: Abandoned '66 Mustang Restomod Part-Out (Wilwood, Ididit, Quick Performance, Mishimoto)
  • JasonB66
  • Jul 23, 2026
  • Suspension
Replies
0
Views
93
Suspension Jul 23, 2026
JasonB66
J
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
514
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Thursday at 5:49 PM
85GT4V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?