• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Suspension Questions

  • Thread starter Thread starter ImportSlayer347
  • Start date Start date Oct 22, 2008

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 22, 2008
#1
  • Oct 22, 2008
  • #1
I am completely new at suspension work. I've changed a few shocks in my time but that is about it. I have some questions about upgrading suspension before I start on it this winter.

How hard is it to change a k member? Are there step-by-step instructions somewhere?

What is a coil-over conversion kit?

How does an Anti Roll Bar work and is it tough to adjust?

The shocks and springs I can handle, and I can probably figure out the control arms.

Please be as detailed as you can. I really wanna learn this stuff.
:SNSign:
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Oct 22, 2008
#2
  • Oct 22, 2008
  • #2
The best thing for you to do is go to Maximum Motorsports website and do some research. They have extremely detailed information on every suspension product they sell.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Oct 22, 2008
#3
  • Oct 22, 2008
  • #3
+1 on the MM website. LOTS of good info. Really good parts, too.

Q: How hard is it to change a k member? Are there step-by-step instructions somewhere?

A: Never done it myself, but this is the bad boy that supports your engine and front suspension. A LOT of pieces have to come apart and out (including pulling the motor) to change this.

Q: What is a coil-over conversion kit?

A: Coil-over suspension is simply a setup where the coil spring surrounds the shock/strut. Stock, our Foxes do not have coil-overs. Coil-over suspensions are easier to adjust, and are supposed to perform better.

Q: How does an Anti Roll Bar work and is it tough to adjust?

A: You already have these, one in front and one in rear. They are also sometimes called torsion bars or anti sway bars, though the definition is sometimes confused with a different type of component. The stock ones are non-adjustable, but there are aftermarket pieces that are. They are essentially springs that work by twisting, not compressing. They keep your car level through turns or during drag launches.

A good place to learn about different types of suspensions and their components is actually the HowStuffWorks website. Linkage:

HowStuffWorks "How Car Suspensions Work"
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 22, 2008
#4
  • Oct 22, 2008
  • #4
Maximum motorsports has a great website. Lots of info. There are so many possibilties with which parts to go with. I may spend months just figuring out what parts to get and how I want it set up.
 

WHT306

Member
Oct 21, 2008
104
0
16
HUNTSVILLE AL
Oct 22, 2008
#5
  • Oct 22, 2008
  • #5
YOU DON'T HAVE TO PULL THE ENGINE OR TRANS BUT YOU DO NEED A ENGINE HOIST. WITH THE BODY UP ON JACK STANDS HIGH ENOUGH TO CLEAR ALL PARTS BEING TAKEN OUT HOOK THE ENGINE HOIST UP TO THE ENGINE AND PUT SOME PRESSURE ON IT SO IT KEEPS THE ENGINE WHERE IT NEEDS TO BE , THEN START THE TEAR DOWN AND INSTALL

BY THE WAY HAVE FUN ITS A JOB.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Oct 22, 2008
#6
  • Oct 22, 2008
  • #6
The first place to start is to make sure you know exactly what you want out of the car.

Do you want one that can handle drag launches?

Corner carver?

Or just a more solid street car?

Your next step will depend on your answer to this question.
 

ImportSlayer347

Member
Oct 13, 2008
173
1
19
Sarasota, FL
Oct 22, 2008
#7
  • Oct 22, 2008
  • #7
I want a badass car for occasional street driving, but I wanna be able to launch too.
 

DocG

5th graders > me. They're not bant
Sep 25, 2005
8,297
1,358
194
Cincinnati area
Oct 22, 2008
#8
  • Oct 22, 2008
  • #8
ImportSlayer347 said:
I want a badass car for occasional street driving, but I wanna be able to launch too.
Click to expand...


You could probably build something that is decent at both. But if you really get into the suspension work...you almost need to choose one direction or another. Like mine is bulit for corner carving. It launches pretty good, but nothing like a drag setup would.

But I prefer to take turns really damn fast
 
You must log in or register to reply here.

Similar threads

Suspension Setting Front Alignment - Do I care about the rear's thrust angle?
  • dan50
  • Nov 27, 2025
  • Fox 5.0 Mustang Tech
Replies
5
Views
425
Fox 5.0 Mustang Tech Nov 28, 2025
Kid wita 5oh
D
Brake & Suspension Rebuild
  • DuluthFoxbody
  • Nov 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
352
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Saturday at 8:51 AM
Rdub6
Front Coil Overs and Rear Traditional Springs within a Maximum Motorsports K-Member Kit
  • Habu135
  • Sep 7, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
966
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 9, 2026
Habu135
Suspension Harsh Ride
  • PonyGTrider
  • Mar 20, 2026
  • Fox 5.0 Mustang Tech
  • 2 3 4
Replies
62
Views
3K
Fox 5.0 Mustang Tech Apr 11, 2026
Noobz347
H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
2K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?