This is crazy but I can't find the LMR part number for the brake kit I put on my car a bunch of years ago. I have receipts for almost everything I ever did to the car but somehow can't find a thing on this brake kit. FIrst off....I've already talked to the guys at LMR and they couldn't find anything. They are a very organized company and I'm sure the info is there somewhere but I don't expect them to dig thru stuff for this.
Here is an example of what I'm looking for.......
This link is an old link from an install article. They linked to this old brake kit from LMR and if you click on it it shows "no longer available." The good thing is it shows the whole kit and all the exact parts and part numbers of each item. I'd like to find this same info for the FRONT kit I put on my car. I'd like to print out the page for my records. LMR says they are basically '03-04 Cobra spec.
The general specs on my kit for clarity:
-SN95 spindles and hubs (5-lug and 94/95)
-13" cobra rotors - Powerslot
-13" Cobra calipers - Red
-braided brake lines
-SN95 Ball joints
That's the main parts. If I've left anything out just ask. Surely someone has the SVE number. It's the 2300K kits parts but front only. My kit did not come with a new master cylinder or anything else that not under the fenders. The cost should help.....it was $949.99 for this kit. I bought it in 2012 I think. I have all my LMR receipts from 2013 on in one file and it's before that. Thanks for the help.
Here is an example of what I'm looking for.......
This link is an old link from an install article. They linked to this old brake kit from LMR and if you click on it it shows "no longer available." The good thing is it shows the whole kit and all the exact parts and part numbers of each item. I'd like to find this same info for the FRONT kit I put on my car. I'd like to print out the page for my records. LMR says they are basically '03-04 Cobra spec.
The general specs on my kit for clarity:
-SN95 spindles and hubs (5-lug and 94/95)
-13" cobra rotors - Powerslot
-13" Cobra calipers - Red
-braided brake lines
-SN95 Ball joints
That's the main parts. If I've left anything out just ask. Surely someone has the SVE number. It's the 2300K kits parts but front only. My kit did not come with a new master cylinder or anything else that not under the fenders. The cost should help.....it was $949.99 for this kit. I bought it in 2012 I think. I have all my LMR receipts from 2013 on in one file and it's before that. Thanks for the help.
Last edited:
Might it have been the LRS-4234SN-K?
www.stangnet.com
www.allfordmustangs.com
Bullitt wheels on my 1988 LX
I saw a pic of an LX with Bullitt wheels and fell in love. My blood is pumping to get those wheels installed but I am still at the early stages of the project, meaning my 18,000 original mile car still has the 4 lug OEM rotors and axles. I found this: from Late Model Resto. So Cobra 13"...
5 Lug Conversion 1987-1993 Mustang
I have read the sticky on 5.0 tech on how to go about converting from 4 to 5 lug. So I found someone who has a complete conversion kit for $175 minus the rear axle. Here is his email: Well, almost everything is new. The spindles are the only thing that was bought used. All the brake hardware...
I can't get any reference for that number anywhere. I'll keep that number though until I figure it out. Surely someone has an old LMR catalog? I have an old one that is one year too new or it would be in there. Thanks for the reply!
Edit: I'm thinking it would be a part number starting with SVE like that rear I linked. I have the paper copy of that link I printed out back then to match the front I did.
Edit: I'm thinking it would be a part number starting with SVE like that rear I linked. I have the paper copy of that link I printed out back then to match the front I did.
I was thinking the same thing, however, I'm not sure how far back their SVE brand goes. I don't think it's been around that long.I can't get any reference for that number anywhere. I'll keep that number though until I figure it out. Surely someone has an old LMR catalog? I have an old one that is one year too new or it would be in there. Thanks for the reply!
Edit: I'm thinking it would be a part number starting with SVE like that rear I linked. I have the paper copy of that link I printed out back then to match the front I did.
I’m sure you looked at this already, but how far back does your order history go if you click on the “orders” button.
One year shy. When I called in they also could only go back to 2013. I'm gonna look in my pictures and see if I happened to snap a pic of the box. I took sequenced pics of the install but not sure if I got the box. Pretty sure I didn't. I know as many folks are on here someone has an old catalog. It'd be practically impossible that someone doesn't. All depends if they are willing to help with the info. We shall see.
Found it!
SVE-2300KS
Now to see if I can find a parts breakdown of that part number. Still need that catalog page someone has out there.
SVE-2300KS
Now to see if I can find a parts breakdown of that part number. Still need that catalog page someone has out there.
Similar threads
- Replies
- 2
- Views
- 124
- Replies
- 2
- Views
- 483
- Replies
- 19
- Views
- 1K
- Replies
- 3
- Views
- 250