Swap Starting Monday!!

95StallionGT

New Member

Mar 30, 2005

68

0

0

Cashville, Tennekkee

Sep 23, 2005

#1

• Sep 23, 2005

• #1

Well, I've contimplated it for about a year now and finally made a decision. Im doin the T-5 swap!! Tired of the sluch box AODE. Yeah I know I could build it but I really want a 5-speed. So Monday=AODE out;T-5 in

So here's my question; I need to know EVERYTHING im going to need to do the swap. EVERYTHING, I mean down to bearings, seals, etc, etc. Im ordering most of everything from 5.0 Resto, so its a brand new T-5. I dont want to forget one thing and have to stop the install and order a part. So all you swap guys pitch in and help a fellow stanger!

 

R

reldapimp

New Member

Jul 12, 2005

94

0

0

Sep 23, 2005

#2

• Sep 23, 2005

• #2

use the search button.. Has been answered countless number of times..

"t5 swap" should give you all the answers

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Sep 24, 2005

#3

• Sep 24, 2005

• #3

94/95 t5 trans and bellhousing
clutch kit (clutch/pressure plate/throw out bearing)
flywheel
clutch cable
5speed pedals
5speed computer
t5 wiring harness
shifter boot (leather trim piece that makes the shifter look pretty)

and the misc bolts that go along with that stuff

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Sep 24, 2005

#4

• Sep 24, 2005

• #4

urban96 said:

94/95 t5 trans and bellhousing
clutch kit (clutch/pressure plate/throw out bearing)
flywheel
clutch cable
5speed pedals
5speed computer
t5 wiring harness
shifter boot (leather trim piece that makes the shifter look pretty)

and the misc bolts that go along with that stuff

Click to expand...

don't forget the clutch fork, you will need the lower shifter boot as well....... goes over the shifter and seals off the tunnel from interior...i don't know if the driveshafts are the same for t-5's and aod's either but i would check....if you just need a yoke i have an extra you could have.....



OH yeah you won't be able to drive it without a shifter... if you going with a new t-5 i wouldn't put synthetic fluid in it to start with either.......i would make sure you bought an aftermarket shifter, it'll last a lot longer that way...


just my .02



jason

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Sep 24, 2005

#5

• Sep 24, 2005

• #5

aode driveshaft worked just fine for me

also need that bearing that goes in the block, i forget the name of it right now tho

 

95StallionGT

New Member

Mar 30, 2005

68

0

0

Cashville, Tennekkee

Sep 24, 2005

#6

• Sep 24, 2005

• #6

urban96 said:

aode driveshaft worked just fine for me

also need that bearing that goes in the block, i forget the name of it right now tho

Click to expand...

Yeah that would be helpful to know.

MYTIGHT95 - PM me about that yoke, I could use it.

 

94 Cobra 5.0

Member

Sep 18, 2004

114

1

16

Ft. Riley, KS

Sep 24, 2005

#7

• Sep 24, 2005

• #7

pilot bearing for the back of the crankshaft. if you buy clutch kit most of the time they come with the pilot bearing but you would have to check that out on the clutch that your purchasing.

 

mytight95

Active Member

Apr 11, 2003

2,605

0

46

Dothan,Al

Sep 24, 2005

#8

• Sep 24, 2005

• #8

make sure you get a QUALITY TOB, and Pilot bearing or you will be changine them shortly....


jason

ps..... you can have the yoke, send me an e-mail at mytight95@msn.com, and cover shipping.... should be cheap depending on zip code...

 

GRGT1994

New Member

Sep 22, 2004

1,034

0

0

Sep 24, 2005

#9

• Sep 24, 2005

• #9

You are starting this Monday and you are still ordering parts? Wow, get ready to wait. I try to get everything in hand at least a week or two ahead - especially for a major job like that.

Definitely get the lower shift boot too. I ran my car a few times without it, and you get a lot of heat coming up through there - plus lots of noise.

 

G

Green 94 5.0

Founding Member

Mar 25, 2002

2,601

12

79

Ft. Lauderdale, FL

Sep 24, 2005

#10

• Sep 24, 2005

• #10

look here.....ive answered this question countless times.....

http://forums.stangnet.com/showthread.php?t=562036

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Sep 24, 2005

#11

• Sep 24, 2005

• #11

yep, pilot bearing is the name of that lil bugger