• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

swapping a manual for an auto tranny???

  • Thread starter Thread starter mustangsCobra12
  • Start date Start date Jun 20, 2004
M

mustangsCobra12

New Member
Aug 8, 2003
28
0
0
Azle, TX
Jun 20, 2004
#1
  • Jun 20, 2004
  • #1
I recently had surgery and i am not want to sell my car. I have a 2000 gt with a t-5 and would like to get an auto. I know that I need an all manual valve body and will still have to shift becuase i am not wanting to switch computers. can anyone help me go about this and give an estimate of what i need to do first. I miss my car.
 

dmarco_4u

New Member
Mar 9, 2004
194
0
0
Jun 20, 2004
#2
  • Jun 20, 2004
  • #2
sorry to hear about the surgery, hope you get better.
keep all the mods you have and just trade your manual for an automatic, there is alot of hungry Mustang owners trying to get a manual and would be glady to trade their automatic, I was one.
 

streetstang03

unModerator
Dec 27, 2003
0
1
0
the dark side of the moon/home of the 1999, 2003,
Jun 20, 2004
#3
  • Jun 20, 2004
  • #3
lets just swap trannies

I'm in Texas too
 

DBMSTNG

I fantasize about it being BIG!
Founding Member
Apr 23, 2002
2,120
0
56
not quite here
Jun 20, 2004
#4
  • Jun 20, 2004
  • #4
mustangsCobra12 said:
I recently had surgery and i am not want to sell my car. I have a 2000 gt with a t-5 and would like to get an auto. I know that I need an all manual valve body and will still have to shift becuase i am not wanting to switch computers. can anyone help me go about this and give an estimate of what i need to do first. I miss my car.
Click to expand...


i'm not 100% sure, but i think the GT's PCM is calibrated for both auto and manual tranny's meaning you can swap to an auto and the PCM will know you know have an auto. if not, you can get a chip.
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Jun 20, 2004
#5
  • Jun 20, 2004
  • #5
mustangsCobra12 said:
I recently had surgery and i am not want to sell my car. I have a 2000 gt with a t-5 and would like to get an auto. I know that I need an all manual valve body and will still have to shift becuase i am not wanting to switch computers. can anyone help me go about this and give an estimate of what i need to do first. I miss my car.
Click to expand...

I don't know if what DMBSTNG said above is true or not. If not, then you'll need a chip or new ECU so the car will work with the automatic.

The transmission I'm guessing you're going to want is a 4r70w automatic. Its the transmission found in the 4.6ltr GT's that are automatics. It's a good transmission. Anyhow, you're going to need the transmission, torque converter, and a 4r70w transmission yoke. You can still use the stock driveshaft and stock rear end.

Go over to www.modulardepot.com and talk to some of the guys over there. They have represenatives on the board who work for Superchip and can handle the ECU part of the equation. Also, contact Randy Stinchcomb while you're over there. Not only is he a Ford Parts dealer, but he also swapped from a manual to an automatic in his GT so he's familar with the process.
 

MGTConv00

Founding Member
Jul 28, 2002
117
0
0
NJ
Jun 20, 2004
#6
  • Jun 20, 2004
  • #6
mustangsCobra12 said:
I recently had surgery and i am not want to sell my car. I have a 2000 gt with a t-5 and would like to get an auto. I know that I need an all manual valve body and will still have to shift becuase i am not wanting to switch computers. can anyone help me go about this and give an estimate of what i need to do first. I miss my car.
Click to expand...

I'll swap with you! Most def.. pm me if you're interested-
 
You must log in or register to reply here.

Similar threads

B
manual swap
  • brockb
  • Feb 9, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
230
SN95 4.6L Mustang Tech Feb 24, 2026
squeak93
E
4.6l auto to 5.4l 6 speed
  • EastanF5
  • Jan 22, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
181
SN95 4.6L Mustang Tech Jan 22, 2026
EastanF5
E
T
Fox Help Request: Clutch Cable Installation on T5 Swap — I Can’t Find the Mounting Hole
  • TDM389
  • Feb 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
160
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 19, 2026
nickyb
R
Transmission for manual swapping a 1994-1995 GT
  • Rembrant
  • Jul 11, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
1K
1994 - 1995 Specific Tech Jul 13, 2025
Rembrant
R
3
95 gt auto manual swapped help with harness
  • 302-boss95
  • Jul 1, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
209
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 1, 2025
302-boss95
3
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?