• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

swapping out stock aod for a c4

  • Thread starter Thread starter nonglossjason
  • Start date Start date Aug 14, 2006

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Aug 14, 2006
#1
  • Aug 14, 2006
  • #1
Anything different about swapping it in? Or is it the exact same thing? in my 86
 

nonglossjason

I did not have intercourse with a sheep.
Jan 27, 2006
138
20
39
Aug 15, 2006
#2
  • Aug 15, 2006
  • #2
ttt just wondering if there are any modifications needed to put a c4 in the place of the aod
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Aug 15, 2006
#3
  • Aug 15, 2006
  • #3
c4 requires no tp valve adjustment or annything like that, you will need a new shifter.
 

MrKwik

Founding Member
Jan 29, 2000
1,008
0
0
Kansas City, Kansas
Aug 15, 2006
#4
  • Aug 15, 2006
  • #4
There were several variations of the C4 so you need to make sure you match everything up. Mainly the bellhousing, flexplate and stall need to match. The one I have found to fit best in a fox is the 157t version. Ford never used a 157t flexplate on a 5.0 so you will need an aftermarket flexplate to keep the balance right. TCI makes a 50oz/157t flexplate for exacly this and it reasonable. The big bell 164t version can use your stock AOD flexplate but again I had clearance issues when I tried it and there doesnt seem to be as much of a variety of stalls to choose from with the big one. So I would look for a case fill with a small bell. There is actually a 3rd size but you are not likely to run across one since they are as rare as unicorn poop.

You might also need to cut the spot welds on your crossmember and slide it forward, I had to but some might not. Shifter will have to be dealt with unless you are crafty and can make the AOD one work. I have made stock ones work but not the AOD cable shifter.

All I can think of at the moment but Im sure there is more.
 
You must log in or register to reply here.

Similar threads

N
Engine 86 GT no start/stall
  • nweber
  • Jul 28, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
279
Fox 5.0 Mustang Tech Jul 29, 2026
AeroCoupe
J
Engine Tuning...?
  • justadude07
  • May 30, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
401
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
D
Yet another v8 swap
  • dulcimerbob
  • Sep 19, 2026
  • 1974 - 1978 Mustang II Talk & Tech
  • 4 5 6
Replies
113
Views
3K
1974 - 1978 Mustang II Talk & Tech Nov 10, 2026
LILCBRA
Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
769
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
C
Help with manual conversion
  • CPH89LX
  • Aug 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
728
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
2000xp8
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?