i took my front swaybar off awhile ago and have lost all my bushings to put it back on. i went to order new ones but they said the factory installed different sizes.so my question is how do i measure it to figure out what size i have.
If you dont have a Vernier caliper, you can also use a crescent wrench and get real close. Close the wrench around the bar. Then remove it and measure the gap between the jaws.
I took a piece of paper and reached under my car to find the circumference of it and found the diameter that way. I came up with 28.3 mm but its probably not too accurate, ordering the 30 mills now.