• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

T-5 swap speedo gear question

  • Thread starter Thread starter Saiboot
  • Start date Start date Jun 29, 2006
S

Saiboot

Member
Apr 25, 2005
32
0
6
Clearwater, FL
Jun 29, 2006
#1
  • Jun 29, 2006
  • #1
Hey, I'm gonna do the A4LD to T-5 swap soon. I'm gathering all the parts together, but I had a question. I've got a 93 4 cylinder with the 3.73 rear end. Do I need to change the speedo gear when I install my t-5 or use my old one? I think I heard the manual rear ends had 3.55s. Also, if I need a different one, does anyone know the number of teeth on the drive gear of the A4LD and the T-5s? Need to figure out what driven gear I need to get if different. Thanx!
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Jun 30, 2006
#2
  • Jun 30, 2006
  • #2
The manual cars had 3.45 rears. Most T5's have the 7 tooth drive gear but there's a 6 tooth gear found in some. You'll need the tag number off your T5 to determine the speedo drive gear tooth count.

After that, its just a matter of some simple math to figure out the driven gear tooth count.

The driven gears are different between the auto and the 5spd. Stinger says he just cut the extra length of the tip off of the automatic gear and used it in his T5, though I don't remember how accurate his speedo was.
 
S

Saiboot

Member
Apr 25, 2005
32
0
6
Clearwater, FL
Jun 30, 2006
#3
  • Jun 30, 2006
  • #3
The tag on my tranny is 1352209. Is there somewhere I can find out the gear by way of that? I think I saw that the color could indicate the teeth too, which i know is yellow. 7 sound right for that?

Yea, I remember reading abt grinding the gear in Stinger's article, but I want to get as close as I can to accurate, and it doesn't specify whether how much it'd be off, or if it would be.
 

Stinger

Founding Member
Jul 7, 2001
7,754
24
118
Basehor (Kansas City), KS
Jun 30, 2006
#4
  • Jun 30, 2006
  • #4
My speedo was accurate, I wouldn't have done it that way if it wasn't. The auto trans already has the correct gear for your rear gears, just grind the end off and use it.
 
S

Saiboot

Member
Apr 25, 2005
32
0
6
Clearwater, FL
Jun 30, 2006
#5
  • Jun 30, 2006
  • #5
Sounds good, thanx!
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jul 1, 2006
#6
  • Jul 1, 2006
  • #6
Manual Transmissions with 6 Tooth Drive Gear



Not found in OEM applications



Item Number
Description
N/A
3.08 Gear Ratio / Not possible

C0DZ-17271-A
3.27 Gear Ratio / Maroon 16 Speedo Gear

C3DZ-17271-C
3.55 Gear Ratio / White 17 Speedo Gear

C0DD-17271-B
3.73 Gear Ratio / Yellow 18 Speedo Gear

C0DZ-17271-B
3.90 Gear Ratio / Pink 19 Speedo Gear

C1DZ-17271-A
4.10 Gear Ratio / Black 20 Speedo Gear

C4OZ-17271-A
4.30 Gear Ratio / Red 21 Speedo Gear



Manual Transmissions with 7 Tooth Drive Gear



1983-1989 T-5 OEM
Pre 1993 T-5 Aftermarket
1996-1998 Cobra T-45 OEM
All Tremec Transmissions



Item Number
Description
C0DZ-17271-A
2.73 Gear Ratio / Maroon 16 Speedo Gear

C0DD-17271-B
3.08 Gear Ratio / Yellow 18 Speedo Gear

C0DZ-17271-B
3.27 Gear Ratio / Pink 19 Speedo Gear

C1DZ-17271-A
3.55 Gear Ratio / Black 20 Speedo Gear

C4OZ-17271-A
3.73 Gear Ratio / Red 21 Speedo Gear

Jeep Part #j3167393
4.10 Gear Ratio / White 23 Speedo Gear



Manual Transmissions with 8 Tooth Drive Gear



1990-1995 T-5 OEM
1996-1998 T-45 OEM Except Cobra



Item Number
Description
C0DD-17271-B
2.73 Gear Ratio / Yellow 18 Speedo Gear

C1DZ-17271-A
3.08 Gear Ratio / Black 20 Speedo Gear

C4OZ-17271-A
3.27 Gear Ratio / Red 21 Speedo Gear

Jeep Part #j3167393
3.55 Gear Ratio / White 23 Speedo Gear

Jeep Part #j3167393
3.73 Gear Ratio / White 23 Speedo Gear (Not 100% accurate. This combination will offer the best accuracy without changing the drive gear. Change drive gear to a 6 tooth for complete accuracy. See 6 tooth table.)

Jeep Part #j3167393
4.10 Gear Ratio / White 23 Speedo Gear (Not 100% accurate. This combination will offer the best accuracy without changing the drive gear. Change drive gear to a 6 tooth for complete accuracy. See 6 tooth table.)



Automatic Transmissions with 7 Tooth Drive Gear



1983-1989 Automatic Transmissions



Item Number
Description
D0AZ-17271-A
2.73 Gear Ratio / Blue 16 Speedo Gear

C7AZ-17271-B
3.08 Gear Ratio / Gray 18 Speedo Gear

C7VY-17271-A
3.27 Gear Ratio / Tan 19 Speedo Gear

C8SZ-17271-B
3.55 Gear Ratio / Orange 20 Speedo Gear

D0OZ-17271-B
3.73 Gear Ratio / Purple 21 Speedo Gear

Jeep Part #j3167393
4.10 Gear Ratio / White 23 Speedo Gear



Automatic Transmissions with 8 Tooth Drive Gear



1990-1998 Automatic Transmissions



Item Number
Description
C7AZ-17271-B
2.73 Gear Ratio / Gray 18 Speedo Gear

C8SZ-17271-B
3.08 Gear Ratio / Orange 20 Speedo Gear

D0OZ-17271-B
3.27 Gear Ratio / Purple 21 Speedo Gear

Jeep Part #j3167393
3.55 Gear Ratio / White 23 Speedo Gear

Jeep Part #j3167393
3.73 Gear Ratio / White 23 Speedo Gear (Not 100% accurate.)

Jeep Part #j3167393
4.10 Gear Ratio / White 23 Speedo Gear (Not 100% accurate.)



Now if you really want to change the internal drive gear of your manual tranny you can match it according to the table below. Be aware that the 6 tooth will offer the most combos for numerically higher gear ratios and offer the greatest degree of accuracy. The 6 tooth gear selection table for a manual tranny is the first in the page.


Item Number
Description
E3ZZ-17285-B
6 Tooth Internal Drive Gear / Black

E3ZZ-17285-A
7 Tooth Internal Drive Gear / Yellow

F0ZZ-17285-A
8 Tooth Internal Drive Gear / Green
 
R

RustBucket

New Member
Jun 8, 2003
585
0
0
Buford, GA
Jul 2, 2006
#7
  • Jul 2, 2006
  • #7
Your list says "Not found in OEM applications" under 6 tooth drive gear. Everything I've got on BW T5's says the following:

BW 1352-114 (85-86 TC) 6 tooth drive gear
BW 1352-116 (85-86 SVO) 6 tooth drive gear.

1352-115 was an aftermarket trans, but it also had a 6 tooth gear.

 
You must log in or register to reply here.

Similar threads

T
Newbie looking for some info on speedo gears
  • TDM389
  • Nov 15, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
240
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 16, 2025
TDM389
T
H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
255
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
304
Other Auto Tech Mar 3, 2026
Noobz347
C
Drivetrain T-5 transmission issue
  • Ch3No2
  • Jul 11, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
373
Fox 5.0 Mustang Tech Jul 18, 2025
2000xp8
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
538
SN95 V6 Mustang Tech Tuesday at 2:38 PM
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?