t-5?

G

geezer69

New Member

Mar 10, 2011

5

0

0

Mar 10, 2011

#1

• Mar 10, 2011

• #1

well folks this is my ? i have an 83 gt 5.o with a t-5.the tranny is no good. i have a 96 v6 with a t-5. can i use the tranny from the 96 v-6 in the 83 5.o? im new here . i hope i posted in the rite place.

 

C

cammed89lx

New Member

Oct 25, 2010

87

0

0

Mar 10, 2011

#2

• Mar 10, 2011

• #2

I believe that you can, because they are the same trans, but you will need to mix and match drive shafts to make it fit(I think).. I remember somethin about a part being 4 inches off. Not sure if it is drive shaft or what. If i remember correctly.

 

G

geezer69

New Member

Mar 10, 2011

5

0

0

Mar 10, 2011

#3

• Mar 10, 2011

• #3

thanks for the info.i can get the shaft too.i'll proly go get it today.my daily driver bit the dust and im bummin a ride. i bought a used tranny for 500 bucks and it lasted 8 miles. hahaha....thanks again for your help.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,367

18,112

224

Massachusetts

Mar 10, 2011

#4

• Mar 10, 2011

• #4

Input shafts need to be swapped. Not driveshaft. You need to get an input shaft from an 85.5 -93 v8 t5 and a bearing retainer and swap it onto the sn95 t5.

 

90lxcoupe

20+ Year Stangneter

Oct 7, 2003

3,596

350

134

Mar 10, 2011

#5

• Mar 10, 2011

• #5

Mustang5L5 said:

Input shafts need to be swapped. Not driveshaft. You need to get an input shaft from an 85.5 -93 v8 t5 and a bearing retainer and swap it onto the sn95 t5.

Click to expand...

or you could use the 94-95 bell and driveshaft and it will all bolt right in

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,367

18,112

224

Massachusetts

Mar 10, 2011

#6

• Mar 10, 2011

• #6

Or that. Shifter position would be about 3/4" further back

 

G

geezer69

New Member

Mar 10, 2011

5

0

0

Mar 10, 2011

#7

• Mar 10, 2011

• #7

thanks folks.seems i have a couple options.i'll see which way works out best for me.