T.F. Stage 2 Cam Users

[wild86stang]

I'm looking for anyone with experience with Trick Flow's stage 2 cam. I'd just like to know if you had problems with not enough vaccum and if it caused any problems with the stock computer. It will be installed in an 86 5.0L with MAF, track heat heads, shorty headers, o/r exhaust, and an edelbrock performer intake. Thanks for any advice in advance.

 

[Modular2v]

throw it in a RIP IT!!!!!

 

[fivepoint-0]

good cam, idles at 800 rpm, pulls hard to 6200. at least 3000 stall.

 

[wild86stang]

It's a five speed by the way. I've heard many good things about Trick Flows cams, but what I'm specifically wondering is if it'll mess with my stock computer or brakes (because of the loss of vaccum). Trick Flow e-mailed me (within a few hours) and said it should run about 11" of vaccum. The only thing hooked up to my vaccum distribution block is the line for the brakes. I'm hoping that means there is enough vaccum to spare since I don't have a/c or cruise control. Thanks

 

[Modular2v]

it shouldnt mess with anything since u are a maf conversiant.....my speed density car was freaking out with a 500 lift cam so i switched to carb but with maf you should be fine