t5 conversion.

N

ngt65

New Member

Feb 10, 2004

8

0

0

Feb 24, 2004

#1

• Feb 24, 2004

• #1

I have a1965 mustang and I am instaling a 1989 5.0 with a t5 trany I got the motor part taken care of. my question is has any body done cable clutch and the cross member with out odering from some one else ? I have all the tools to do this my self but if some got some good ideas and measurment. they will help me. thanks

 

B

bnickel

Founding Member

Aug 21, 2002

5,640

3

77

lubbock, texas

Feb 25, 2004

#2

• Feb 25, 2004

• #2

welcome to the board. check out www.mustangsteve.com for a how to on the cable clutch, he sells 'em pretty cheap too, the crossmember shouldn't be too difficult as long as you are good with a welder. sorry i can't help much more than that but i'm sure at elast a couple other people will chime in with some measurements and specs

 

347Fastback

Member

Nov 30, 2003

340

0

17

Central Coast

Feb 25, 2004

#3

• Feb 25, 2004

• #3

I am currently doing the same conversion and I bought Mustang Steve's complete master Kit... Do a search on this site. There is a wealth of info out there that will answer your questions...

 

6Stang7

New Member

Jun 1, 2003

1,470

0

0

Livermore, CA

Feb 25, 2004

#4

• Feb 25, 2004

• #4

Hopefully 3spd on floor will pop in here. I know he is doing the T-5 to his car(a 66), and he made his own crossmember.

-Shaun