• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

T5 questions (should be easy)

  • Thread starter Thread starter SadbutTrue
  • Start date Start date Jul 19, 2007

SadbutTrue

Founding Member
May 1, 2002
2,391
4
49
Thousand Oaks, California
Jul 19, 2007
#1
  • Jul 19, 2007
  • #1
As you might recall from a thread about a week or so ago, I'm trying to swap a T5 into my 66. I have a few things I have questions on..

The first concerns the speedometer cable/gear. Where do you guys find replacement speedometer gears? Also, how does the speedometer cable/sender connect to the gauge (most importantly, does anyone know what modifications I'm going to need to connect my 66's speedometer to the T5? Will my C4 automatic parts work?

I also need a reliable T5 speedometer gear calculator... I believe my 89 T5 has a 7 tooth drive gear,a nd one calculator said with my tires (225 60r15), rear ratio (3.25), and assuming 1000 revs/mile that I'd need a 17 tooth gear. Sound right?

The second has to do with my new Pro 5.0's shifter stop screws. On the advice of people here (and elsewhere), i got this shifter. Many people cited that though its a smoother shifter, its also almost a necessity because the stop screws stop you from overshifting and damaging the forks. How do you set these screws?

Thans a ton, it is very much appreciated...
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,374
18,120
224
Massachusetts
Jul 19, 2007
#2
  • Jul 19, 2007
  • #2
SadbutTrue said:
As you might recall from a thread about a week or so ago, I'm trying to swap a T5 into my 66. I have a few things I have questions on..

The first concerns the speedometer cable/gear. Where do you guys find replacement speedometer gears? Also, how does the speedometer cable/sender connect to the gauge (most importantly, does anyone know what modifications I'm going to need to connect my 66's speedometer to the T5? Will my C4 automatic parts work?

I also need a reliable T5 speedometer gear calculator... I believe my 89 T5 has a 7 tooth drive gear,a nd one calculator said with my tires (225 60r15), rear ratio (3.25), and assuming 1000 revs/mile that I'd need a 17 tooth gear. Sound right?

The second has to do with my new Pro 5.0's shifter stop screws. On the advice of people here (and elsewhere), i got this shifter. Many people cited that though its a smoother shifter, its also almost a necessity because the stop screws stop you from overshifting and damaging the forks. How do you set these screws?

Thans a ton, it is very much appreciated...
Click to expand...



Speedo gears here

http://www.steeda.com/products/speedometer_recalibration_gears.php

Those are ford part numbers, so if you take them to ford you can prob pick one up there.


To set the shift stops, you want to push the shifter forward and set the stop so that it just barely stops the shifter. When shifting, you don;'t want't hit the set screws, but you want it close enough so that if you overextend the shift, it will stop it right away.

A feeler gauge helps here, but i just eyeball it. Just make sure it doesn't hit in any gear with a little weight on the shifter (not much though)

Are you sure you have a 7-tooth drive gear?? If you look up the speedo hole you can see the drive gear. If it's yellow, you have a 7. I beleive green is 8 and black is 6.


Are your rear gears 3.27's?? According to this calc, you should be running an 18-tooth gear

http://www.sccoa.com/faq/speedgr.html
 
You must log in or register to reply here.

Similar threads

For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
3
Views
984
Drivetrain Parts Sep 7, 2026
AeroCoupe
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
SN Mustang Magnum T56 swap
  • revhead347
  • May 24, 2024
  • 1994 - 1995 Specific Tech
Replies
15
Views
7K
1994 - 1995 Specific Tech Jun 28, 2026
GearHeadGuy
For Sale 94 Cobra 408w AOD Project For Sale
  • Labora
  • Oct 11, 2024
  • SN95 Mustangs For Sale (1994-04)
Replies
3
Views
2K
SN95 Mustangs For Sale (1994-04) Aug 17, 2026
Labora
A
T5 conversion questions
  • Animal Lawyer
  • Jul 9, 2021
  • Classic Mustang Specific Tech
Replies
14
Views
5K
Classic Mustang Specific Tech Aug 6, 2021
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?