T5 questions (should be easy)

SadbutTrue

Founding Member
May 1, 2002
2,391
4
49
Thousand Oaks, California
As you might recall from a thread about a week or so ago, I'm trying to swap a T5 into my 66. I have a few things I have questions on..

The first concerns the speedometer cable/gear. Where do you guys find replacement speedometer gears? Also, how does the speedometer cable/sender connect to the gauge (most importantly, does anyone know what modifications I'm going to need to connect my 66's speedometer to the T5? Will my C4 automatic parts work?

I also need a reliable T5 speedometer gear calculator... I believe my 89 T5 has a 7 tooth drive gear,a nd one calculator said with my tires (225 60r15), rear ratio (3.25), and assuming 1000 revs/mile that I'd need a 17 tooth gear. Sound right?

The second has to do with my new Pro 5.0's shifter stop screws. On the advice of people here (and elsewhere), i got this shifter. Many people cited that though its a smoother shifter, its also almost a necessity because the stop screws stop you from overshifting and damaging the forks. How do you set these screws?

Thans a ton, it is very much appreciated...
 
As you might recall from a thread about a week or so ago, I'm trying to swap a T5 into my 66. I have a few things I have questions on..

The first concerns the speedometer cable/gear. Where do you guys find replacement speedometer gears? Also, how does the speedometer cable/sender connect to the gauge (most importantly, does anyone know what modifications I'm going to need to connect my 66's speedometer to the T5? Will my C4 automatic parts work?

I also need a reliable T5 speedometer gear calculator... I believe my 89 T5 has a 7 tooth drive gear,a nd one calculator said with my tires (225 60r15), rear ratio (3.25), and assuming 1000 revs/mile that I'd need a 17 tooth gear. Sound right?

The second has to do with my new Pro 5.0's shifter stop screws. On the advice of people here (and elsewhere), i got this shifter. Many people cited that though its a smoother shifter, its also almost a necessity because the stop screws stop you from overshifting and damaging the forks. How do you set these screws?

Thans a ton, it is very much appreciated...



Speedo gears here

http://www.steeda.com/products/speedometer_recalibration_gears.php

Those are ford part numbers, so if you take them to ford you can prob pick one up there.


To set the shift stops, you want to push the shifter forward and set the stop so that it just barely stops the shifter. When shifting, you don;'t want't hit the set screws, but you want it close enough so that if you overextend the shift, it will stop it right away.

A feeler gauge helps here, but i just eyeball it. Just make sure it doesn't hit in any gear with a little weight on the shifter (not much though)

Are you sure you have a 7-tooth drive gear?? If you look up the speedo hole you can see the drive gear. If it's yellow, you have a 7. I beleive green is 8 and black is 6.


Are your rear gears 3.27's?? According to this calc, you should be running an 18-tooth gear

http://www.sccoa.com/faq/speedgr.html