• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

T5 Trans Noise?

  • Thread starter Thread starter Scott7512
  • Start date Start date Sep 5, 2017

Scott7512

Active Member
May 19, 2015
153
8
38
Branchland WV
Sep 5, 2017
#1
  • Sep 5, 2017
  • #1
93 LX 5.0
I have had the car for three years now and it's always had a noise that sounded like exhaust noise to me but it was only there on part throttle while in gear and moving. I very seldom drive it for more than 10 mile at a time so I thought I would get around to fixing it eventually. But I decided to hit mustang week this year. A little over 500 miles and my son and I made it today.
Problem is now the noise is louder. I now think it has something to do with the transmission. Any ideas what it might be?Should I be worried about getting back home?
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Sep 5, 2017
#2
  • Sep 5, 2017
  • #2
Does it change with the car is in neutral? How about with the clutch in vs out?

If it sounds like an exhaust leak it could just be that the H pipe is loose at the header flanges.
 

Scott7512

Active Member
May 19, 2015
153
8
38
Branchland WV
Sep 5, 2017
#3
  • Sep 5, 2017
  • #3
Only when in gear with a load on the drivetrain. Clutch in- no noise. Trans in neutral with clutch out- no noise. Mostly part throttle. If I get on it it gets quieter.
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Sep 5, 2017
#4
  • Sep 5, 2017
  • #4
Sounds like it may be a throw out bearing. The trans would have to come out to replace it....but the bell housing and clutch can stay. Exhaust dropped, trans mount bolts, cross member, speedometer cable, neutral switch, reverse switch, driveshaft, shifter boot, shifter arm, shifter lower rubber boot, clutch cable, 4 bolts from the trans to bell housing, clutch fork will be laying in the bell housing with the throw out bearing sitting in it.

If the clutch isn't adjusted right it can cause a noise ( rattle, squeak, grind ) under the conditions you noted. Not hard to adjust if there is an aftermarket adjuster at the fire wall or end of clutch cable at trans.

With a mirror on a stick and a flashlight you may be able to see the throw out bearing riding in the clutch fork. I suggest a decent set of jack stands placed under the control arms up front or on the k member. You'll have to get almost all the way under the car to attempt to see it.

There's a quick lube there near 17 that allowed me to pull my car over the quick lube pit to look at something under my car....and they didn't charge me. My driveshaft bolts were loose ( completely different scenario ).
 
Reactions: revhead347

Scott7512

Active Member
May 19, 2015
153
8
38
Branchland WV
Sep 5, 2017
#5
  • Sep 5, 2017
  • #5
It has the firewall adjuster. Should I tighten or loosen it?
 

Dan02gt

mazing how much gas smell came from that tiny hole
20+ Year Stangneter
Mar 2, 2003
909
415
113
Greenville, NC
Sep 5, 2017
#6
  • Sep 5, 2017
  • #6
You would tighten it. Follow these instructions:
http://www.maximummotorsports.com/How-to-Adjust-a-Mustang-Clutch-Cable.aspx
 

imp

Mustang Master
Jul 13, 2017
531
107
83
Sep 5, 2017
#7
  • Sep 5, 2017
  • #7
FWIW, critics of the then-newly introduced Ford Top-Loader 4-speed claimed they emitted low pitched, growling noises that indicated coming disaster. Mine, one of the very first, Sep. 1964, 289 High Performance "K" package, did it. Not loud, but noticeable. Most evident in neutral. That trans got some real hard use, but never gave up. Ford claimed it originated in the synchronizer blocking rings. They used a much wider, stronger blocking insert than the old Borg-Warner design, like T-10.

How many miles and how severe the service has this T-5 seen? If it's pulled out for reason of checking other components, if no evidence is found for noise production, and based on usage, I would consider opening it's top, and measuring clearances between the blocking rings and gears. Wear is often severest on the 2nd. gear ring.

And then, of course, there was the Chrysler Products design using pin-type synchronizers: UGH!
imp
 

Scott7512

Active Member
May 19, 2015
153
8
38
Branchland WV
Sep 6, 2017
#8
  • Sep 6, 2017
  • #8
Don't know the history of the engine or trans before I got it three years ago. Checked the clutch adjuster and it is good. I only hear it when driving and accelerating. Nothing when slowing down.
I guess I will find out what it is when it breaks. Just hope it makes the 550 miles back home from mustang week. Maybe I will find someone down here to give me an opinion.
 
You must log in or register to reply here.

Similar threads

T5 5th gear 89 gt
  • mac_55
  • Mar 19, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
280
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 20, 2026
Mustang5L5
B
Front window issues
  • bruno
  • Nov 7, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
204
Fox 5.0 Mustang Tech Tuesday at 10:26 PM
AeroCoupe
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
339
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
319
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
565
Fox 5.0 Mustang Tech May 11, 2026
keel
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?