TACH install help

HP Addiction

Founding Member

Jun 14, 2002

261

0

0

Long Island

May 14, 2006

#1

• May 14, 2006

• #1

I am helping my friend install a tach in his 2001 cobra. He purchased it from speedhut. The directions which suck IMO indicate that it does not require a tach adaptor. There is one yellow wire which is the tach lead. However, I am not sure how to hook it up. I assume that I may have to splice into one of the COP but I do not know which wire to tap into. Dont want to start experimenting Ideas? Thanks!

 

HP Addiction

Founding Member

Jun 14, 2002

261

0

0

Long Island

May 14, 2006

#2

• May 14, 2006

• #2

 

04DarkShadowGT

Member

Jan 31, 2004

474

0

17

Fort Wayne, IN

May 14, 2006

#3

• May 14, 2006

• #3

You hook that wire into one of the computer wires under the passenger kick panel. It would be the same as hooking up the raptor shift light.

http://www.raptorperformance.com/

Click on the installations of that site and it should help.

 

DogVomit

Member

Jun 9, 2005

192

1

19

Tampa, FL

May 15, 2006

#4

• May 15, 2006

• #4

If you have the "coil over plug" set up you'll need either an adaptor or http://www.msdignition.com/2006/06-22.htm a Tach signal GMR pickup, if you don't want to cut.

IMO, Don't cut.

 

HP Addiction

Founding Member

Jun 14, 2002

261

0

0

Long Island

May 15, 2006

#5

• May 15, 2006

• #5

Wow...that is perfect! Thanks