• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Tach needle stuck

  • Thread starter Thread starter djjazzydave
  • Start date Start date May 8, 2006

djjazzydave

New Member
May 8, 2006
3
0
0
May 8, 2006
#1
  • May 8, 2006
  • #1
My 95 Cobra was in an accident last year (front end damage/bags blown), so over the winter I did considerable engine work (port/polish, 5-angle, replace valve train…).

Last night I fired up the car for the first time since doing the engine work and noticed my tach needle was on the wrong side of the rubber needle stop at zero RPM. When I start the car it rises from underneath the needle and acts like it’s trying to display RPMs but can’t make it past the rubber needle stop.

Folks on a couple of other forums said to tear out the cluster and move needle manually. Anyone seen this before and know how to fix it (without tearing out the cluster)?


Thanks,
D
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 8, 2006
#2
  • May 8, 2006
  • #2
Dave, welcome to the boards!

It seems to me that there are magnets in the tach which could have allowed this issue to occur. FWIW, it takes less than 5 mins to remove the cluster. Then another couple mins to remove the plastic facade and move the needle.

Good luck.
 

BStevens

Founding Member
Aug 28, 2001
127
0
16
Grand Rapids, MI
May 8, 2006
#3
  • May 8, 2006
  • #3
that would be the easiest fix. as long as its trying to move then you shouldn't need to replace anything. good luck!
 

djjazzydave

New Member
May 8, 2006
3
0
0
May 9, 2006
#4
  • May 9, 2006
  • #4
Thanks guys. Looks like I'll just taker apart and move it over manually.

But, I still wonder how it got there in the first place???
 
You must log in or register to reply here.

Similar threads

M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
751
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
C
Electrical Temp and alt gauge not working
  • coilz347
  • Jun 18, 2022
  • Fox 5.0 Mustang Tech
Replies
2
Views
1K
Fox 5.0 Mustang Tech Jun 18, 2022
Mustang5L5
Engine Help diagnose random overheating??
  • TomOsiris
  • Apr 10, 2022
  • Fox 5.0 Mustang Tech
  • 5 6 7
Replies
122
Views
17K
Fox 5.0 Mustang Tech Jul 3, 2023
General karthief
Tach needle dropping and jumping back up on '93 2.3L
  • Tavis
  • Feb 27, 2020
  • 2.3L (N/A & Turbo) Tech
Replies
11
Views
4K
2.3L (N/A & Turbo) Tech Oct 20, 2024
glowstang93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?