I have a 1995 Mustang that I want to change out the tail lamps on. The car has ugly aftermarket lamps in it
right now, and I really like the 1996 style lamps. Does anyone know if there is a difference in the mounting or actual shape of the 1996 lamps from the 1995 style?
I HAD NO PROBLEMS with the switch.....you say there may be a difference, then you say it works perfectly.No difference in mounting or shape. There may be a difference in the harnesses for the bulbs. I can't say for sure. What I do know for sure is that the '96-'98 harness plugs into your '94-'95 body harness and works perfectly.
I HAD NO PROBLEMS with the switch.....you say there may be a difference, then you say it works perfectly.
Correct. That's what I meant. I ran a set of '96-'98 tails on my '95. They came with harnesses that pluged into my stock body harness. I just never looked to see if the bulb sockets were similar. To the original poster, try to get the harnesses as well if you can. I'm sure a junkyard would be a likely place to find one.Read what he said again. He's talking about where the bulbs plug into the sockets...
Correct. That's what I meant. I ran a set of '96-'98 tails on my '95. They came with harnesses that pluged into my stock body harness. I just never looked to see if the bulb sockets were similar. To the original poster, try to get the harnesses as well if you can. I'm sure a junkyard would be a likely place to find one.
I said in my post, that I made the switch to 96 tai lights, and didn't have any problems , with the BULBS, LIGHTS, or HARNESS.Read what he said again. He's talking about where the bulbs plug into the sockets...
I said in my post, that I made the switch to 96 tai lights, and didn't have any problems , with the BULBS, LIGHTS, or HARNESS.
Read your own post again! The OP asked if there was a difference in the "mounting, or shape" of the light assemblies. Your answer was that they would fit perfectly. That answered the question of the actual mounting of the assembly, but nothing else. You made no mention of the bulbs, lights or harness. Ease up and be more articulate and you wont' have to worry about people misinterpreting you in the future!
@Gearbanger 101 @coupestang2 said that he swapped '96 taillights in a '95 w no problems at all. By reading that statement one would assume that if you take a '96 tailight the wires would connect and the taillight would bolt in place. @coupestang2 is this correct? Did you get a set of taillights for a '96 and they bolted right in? No other parts necessary? If so, @Gearbanger 101 he answered the question perfectly. If not he has some 'splaning to do.They will fit perfect...I had a 95 Gt which I done a Saleen clone. I switched for black 96 tail lights.
@Gearbanger 101 @coupestang2 said that he swapped '96 taillights in a '95 w no problems at all. By reading that statement one would assume that if you take a '96 tailight the wires would connect and the taillight would bolt in place. @coupestang2 is this correct? Did you get a set of taillights for a '96 and they bolted right in? No other parts necessary? If so, @Gearbanger 101 he answered the question perfectly. If not he has some 'splaning to do.
You got too technical for no reason. The OP didn't even take into the consideration the wiring harness. The guy was wanting to know if the 96 taillights would work on a 95 and ole boy replied "yes they will, I've done it." Question answered.A 5.0L TiVCT will fit perfectly between the strut towers of a Fox body....but that doesn't mean it's a direct bolt in and go in place of the stocker.
While I have no doubt that in his mind, he answered the question completely, since he physically went through the process and can play out the steps in his mind.....he didn't elaborate on the specifics beyond the O/P asking if there was a difference in the physical mounting or the shape of the lights. This left details of the actual wiring open to interpretation.....which is why the point was addressed by 02 281 GT in the first place.
No harm done.....but it pays to provide detailed answers to these questions up front, to avoid explaining it a second time later on.
He didn't ask if they'd work, he asked if they'd bolt up.You got too technical for no reason. The OP didn't even take into the consideration the wiring harness. The guy was wanting to know if the 96 taillights would work on a 95 and ole boy replied "yes they will, I've done it." Question answered.
Ps: 96 tailights on a 95 are lame.
THANK YOUYou got too technical for no reason. The OP didn't even take into the consideration the wiring harness. The guy was wanting to know if the 96 taillights would work on a 95 and ole boy replied "yes they will, I've done it." Question answered.
Ps: 96 tailights on a 95 are lame.
A 5.0L TiVCT will fit perfectly between the strut towers of a Fox body....but that doesn't mean it's a direct bolt in and go in place of the stocker.
No harm done.....but it pays to provide detailed answers to these questions up front, to avoid explaining it a second time later on.
Well from one Canadian to another, Perfectly is not quite the correct work, tightly would be more accurate
You're Canadian!?!?Well from one Canadian to another, Perfectly is not quite the correct work, tightly would be more accurate
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?